Drilling exploration wells always carry increased risk given the lack of offset wells. Once of the main uncertainties usually is the depth prognosis derived from surface seismic depth converted data. The accurate prediction of the depth of top carbonate while drilling carbonate reservoirs is important to avoid losses and well control problems. This can have a significant financial impact. This paper demonstrates the use of innovative look-ahead VSP technology in Vietnam to refine depth prediction of the top of carbonate ahead of the bit for accurate geo-stopping.
An offshore exploration well was being drilled in an area with drilling challenges. This was the first well in the field and lacked offset well velocity information, so there was a high degree of depth uncertainty to the top of the carbonate target from surface seismic interpretations, making drilling operations risky. An intermediate VSP was requested to look for reflections ahead of the intermediate TD using Schlumberger VSI1 tool. The VSP data was acquired in open and cased hole using an air gun cluster as the seismic source.
The drilling program required the casing to be set immediately above the top of the carbonate. By acquiring an intermediate VSP, the depth uncertainty was reduced and the target depth prediction was refined. This was achieved using the look-ahead VSP technique, from which the acoustic impedance and velocity ahead of the bit was estimated. This was combined with time-depth from the VSP data over the logged interval to help refine the predicted depth to the top of the carbonate. This was used to optimize the depth at which the casing was set. The depth uncertainty of the key formation top (top of carbonate reservoir) from the surface seismic interpretation was over 180m prior to drilling. The final prediction depth from the VSP interpretation is 7m shallower than the actual carbonate reservoir.
Guided by the inverted acoustic impedance log and velocity ahead of the bit from look-ahead VSP, a further 150m was safely drilled before setting the casing. The casing point was set successfully without penetrating the carbonate. The intermediate VSP results helped to decide drilling ahead in a safe manner with confidence, after setting the casing before penetrating the carbonate target.
