Limits on Data Communication Along the Drillstring Using Acoustic Waves

Abstract

The first commercial acoustic-telemetry system was introduced successfully in 2000 as part of a drillstem-testing system. However, duplicating the success of the acoustic telemetry to environmentally challenging logging-while-drilling (LWD) applications at high data throughput remains a formidable task. The primary limitation arises from normal drilling operations that produce inband acoustic noise at multiple sources at intensities comparable to the transmitter output. This noise, together with the signal attenuation along the drillstring, adversely affects the data throughput. To determine the communication capacity of the drillstring channel using acoustic waves, we examined the impact of channel characteristics, signal attenuation, and noise in detail. On the basis of a communication model that incorporates the effects of both drillstring acoustic channel and noise, we extensively studied the capacity of the system using the waterfilling method. For this analysis, realistic downhole transmitter power output, experimentally measured noise at the surface, and measured attenuation of acoustic waves in the drillstring channel were used as input parameters. The results show that a typical drillstring channel has a potential capacity of up to several hundred bits per second under noisy drilling conditions. Implications of the channel capacity on acoustic-telemetry-system designs are discussed. A communication technique that comes close to realizing a high-rate telemetry system is introduced. Methods to optimize various aspects of the system such that maximum drillstring-channel utilization can be realized under drilling conditions are also discussed. Potential enhancement to data rates through application of error control-coding is covered briefly.

Research on the Cascade-Connected Transducer with Multi-Segment Used in the Acoustic Telemetry System while Drilling

“…Many types of transducer, such as Tonpilz transducers, flextensional transducers, flexural transducers, Piezoelectric rings, magnetostrictive transducers, piezoelectric ultrasonic transducers [25,26], are not suitable to MWD application because of the requirements of configurations, vibration modes, radiation field, acoustic impedance matching layers, etc. [27,28]. Under these restrictions of MWD application, the available types of transducer used in an acoustic telemetry system while drilling are few.…”

Modeling and measurement of microwave propagation multipath channels in drill pipe bore

“…In addition, acoustic signal transmission technology in drill strings, as well as intelligent drilling technology, has relatively fruitful research results in this field. However, these emergent technologies have not been widely utilized in the field due to the limitations in the sound power of acoustic generators [5] and the transmission power of electromagnetic coils [6].…”

Research on Weak Signal Detection with Duffing Oscillator Based on Virtual Instrument Technology

“…It is very important to obtain downhole information by wireless communication for production logging in the oil field, downhole acoustic telemetry system is an effective wireless transmission way to achieve downhole information [1] [2]. It based on the theory of acoustic can be transmitted along the steel medium (oil pipe or drill pipe) to complete information transmission.…”