Lightweight, hydrostatic pressure‐resistance, thermal insulating epoxy syntactic foam with a multiscale ternary structure for marine engineering application

Abstract

The study of lightweight epoxy syntactic foams is of great significance for the exploitation of marine resources. In this work, glass fibers reinforced epoxy hollow spheres (GFs‐EHS) were first prepared using a template method, and a lightweight three‐phase epoxy syntactic foam (LWTP‐ESF) with a multiscale ternary structure was prepared using a molding pressing method with epoxy resin as matrix, hollow glass microspheres (HGMs), and GF‐EHS as the lightweight fillers. The effect of HGMs content on the density, uniaxial compression properties, water absorption, and thermal conductivity of obtained LWTP‐ESF was evaluated. The results indicated that the density, uniaxial compression strength, and thermal conductivity of LWTP‐ESF were consistently decreased, while the water absorption was increased with the increase in HGMs content. The highest specific compression strength and lowest thermal conductivity of LWTP‐ESF could reach 52.77 ± 0.82 MPa·cm3/g and 0.113 ± 0.005 W/(m·K), respectively. Moreover, the effect of hydrostatic pressure on the water absorption and thermal conductivity of LWTP‐ESF were also systematically analyzed. This study provides a novel system and method to prepare lightweight epoxy syntactic foams, and the prepared composites have potential applications in the field of lightweight thermal insulation materials for marine.Highlights The composites with a multiscale ternary structure were designed. The composites possessed significantly lower density and thermal conductivity. The water absorption of composites under hydrostatic pressure was evaluated. The thermal conductivity of composites under hydrostatic pressure was evaluated. The water absorption mechanism and thermal insulation mechanism were proposed.