Lessons Learned from Trial Testing Wellhead Gas Compressor Technology in a Challenging High Condensate Sandstone Environment

Abstract

The objective of this paper is to communicate lessons learned, best practices and process enhancement initiatives identified during an actual implementation of Integral Wellhead Gas Compressor technology. The compressor installation was a technology trial test in a challenging high condensate sandstone environment in a conventional gas field. Several technical lessons learned were identified especially in the areas of liquid handling, produced solids management, as well as downhole well intervention requirements. The methodology was based on collecting and documenting operational challenges and their root causes and corresponding technical solutions as the project progressed. In addition, a benchmarking study was conducted to identify additional areas of improvement to address the root causes of these challenges. Addressing these challenges by implementing the lessons learned highlighted in this paper will ensure expedited project delivery at a reduced cost. Examples of such challenges include unexpected severe liquid slugging, high amounts of solids production, as well as corrosion resistant alloy (CRA) metallurgy requirements. The benchmarking study resulted in the identification of several areas of potential improvement and multiple engineering process enhancement initiatives were recommended. Examples of such initiatives include the utilization of integrated Liquid Handling System (LHS) to mitigate severe liquid slugging and reduce assembly lead-time. In addition, the utilization of surface cyclonic sand filter systems to mitigate solids production. In addition, conducting downhole tubing drift runs to ensure no restrictions are present that can reduce compressor performance along with several other relevant initiatives. In summary, the paper provides a deep dive into several technical operational challenges during the actual implementation of wellhead gas compressor technology in a challenging high condensate sandstone environment. Also, several new initiatives are proposed in this paper with the objective of achieving significant cost savings. It is intended for these initiatives to be adopted as best practices not only to yield cost savings but also to supplement the existing best practice literature in the areas of liquid handling, solid management systems, quality control and well intervention.