Laser ultrasonic visualization technique using a fiber-optic Bragg grating ultrasonic sensor with an improved adhesion configuration

Abstract

<jats:p> In this research, we attempt to establish a reliable structural health monitoring technique for composite materials by combining phase-shifted fiber-optic Bragg grating sensing with the laser ultrasonic visualization technology. In the first part of this article, a novel cross-adhesion configuration is designed to resolve the directionality problem of the phase-shifted fiber-optic Bragg grating ultrasonic sensing. In the adhesion configuration, Lamb waves are guided by an orthogonally bonded optical fiber from the adhesion point to the phase-shifted fiber-optic Bragg grating sensor. The analysis of the ultrasonic measurement results reveals that the proposed adhesion method enables us to use one sensor to receive Lamb waves in all in-plane directions with similar magnitude because two wave components propagating along with the two orthogonal directions are guided to the phase-shifted fiber-optic Bragg grating sensor and exhibit a linear superposition in the sensor. This simplified configuration gives our method an advantage over the existing approaches, such as the rosette configuration in which three or more phase-shifted fiber-optic Bragg grating sensors are required to relieve the sensing directionality. The phase-shifted fiber-optic Bragg grating ultrasonic sensor with the proposed adhesion configuration is then applied to visualize the propagation of ultrasonic waves in aluminum plates and carbon fiber–reinforced plastic laminates. Those verification experiments also show us that the new adhesion configuration is effective at protecting the phase-shifted fiber-optic Bragg grating ultrasonic measurement from the sensing directionality. Meanwhile, the broad bandwidth of the phase-shifted fiber-optic Bragg grating sensor enables us to visualize the propagation behavior of various Lamb wave modes over a broad frequency range. Finally, we also validate that the ultrasonic visualization technique merged with the phase-shifted fiber-optic Bragg grating ultrasonic sensing can be used to identify the hidden damage in the carbon fiber–reinforced plastic composite. </jats:p>

Optical Fiber Sensors for Ultrasonic Structural Health Monitoring: A Review

“…al. [163]. They used a remotely bonded PS-FBG with two orthogonal bonds, which was able to diminish the directional coupling of the waves.…”

Ultrasonic detection of aircraft composite structures by using a high-sensitivity and high-reliability TPU sensor

“…Fiber gratings have been the most popular approach for ultrasonic detection. Yu et al proposed a fiber-optic phase-shift grating sensor for the detection of laser ultrasound in composite materials 12 . Although the phase-shift section helped to decrease the effective interaction length, the range of response frequency was limited to be several megahertz.…”

“…Nevertheless, the assembled multilayer structure may bring sensor instability and fabrication inconsistency. These film sensors exhibit obvious advantages over the grating ones, such as higher sensitivity and broader frequency, especially for the application of laser ultrasonic detection 12 . Therefore, it is much necessary to develop a new type of film sensors for the acquisition of weak echoes in composite materials.…”

Guided waves based damage localization based on mode filtering using fiber Bragg grating sensors

“…This amplification enhances the sensitivity of the FBG sensors to GW. The edge filtering approach was later used for SHM by several researchers [8][9][10][11]. The directionality was incorporated in the SHM algorithm by Soman et al [12].…”