Laser subtractive and laser powder bed fusion of metals: review of process and production features

Abstract

Purpose The purpose of this study is, to compare laser-based additive manufacturing and subtractive methods. Laser-based manufacturing is a widely used, noncontact, advanced manufacturing technique, which can be applied to a very wide range of materials, with particular emphasis on metals. In this paper, the governing principles of both laser-based subtractive of metals (LB-SM) and laser-based powder bed fusion (LB-PBF) of metallic materials are discussed and evaluated in terms of performance and capabilities. Using the principles of both laser-based methods, some new potential hybrid additive manufacturing options are discussed. Design methodology approach Production characteristics, such as surface quality, dimensional accuracy, material range, mechanical properties and applications, are reviewed and discussed. The process parameters for both LB-PBF and LB-SM were identified, and different factors that caused defects in both processes are explored. Advantages, disadvantages and limitations are explained and analyzed to shed light on the process selection for both additive and subtractive processes. Findings The performance of subtractive and additive processes is highly related to the material properties, such as diffusivity, reflectivity, thermal conductivity as well as laser parameters. LB-PBF has more influential factors affecting the quality of produced parts and is a more complex process. Both LB-SM and LB-PBF are flexible manufacturing methods that can be applied to a wide range of materials; however, they both suffer from low energy efficiency and production rate. These may be useful when producing highly innovative parts detailed, hollow products, such as medical implants. Originality value This paper reviews the literature for both LB-PBF and LB-SM; nevertheless, the main contributions of this paper are twofold. To the best of the authors’ knowledge, this paper is one of the first to discuss the effect of the production process (both additive and subtractive) on the quality of the produced components. Also, some options for the hybrid capability of both LB-PBF and LB-SM are suggested to produce complex components with the desired macro- and microscale features.

Multi-Parametric Birefringence Control in Ultrashort-Pulse Laser-Inscribed Nanolattices in Fluorite

“…Finally, the ultrashort-pulse laser inscription process under study in fluorite appeared as a very sophisticated physical phenomenon involving non-linear and non-equilibrium optical, plasma and material effects, as well as their cross-linking effects (plasma absorption [ 32 ], plasma-mediated defect generation [ 18 ], etc.). Meanwhile, stronger research efforts will facilitate the harnessing of this versatile technology both in additive [ 33 ] and subtractive [ 17 , 24 ] modes.…”

Effects of Nano-CeO2 on Microstructure and Properties of WC/FeCoNiCrMo0.2 Composite High Entropy Alloy Coatings by Laser Cladding

“…Coaxial powder feeding processing was adopted, and argon gas was used as the protective gas. The process parameters were optimized by the orthogonal test, and the specific values are shown in Table 2 [ 28 , 29 , 30 , 31 ]. The laser cladding equipment [ 13 ] and system components are shown in Figure 1 .…”

Nitriding Behaviour and Microstructure of High-Nitrogen Stainless Steel during Selective Laser Melting

“…Metal additive manufacturing technology is considered to be one of the major breakthroughs in the field of manufacturing of the last 30 years—it is even considered to promote the third industrial revolution [ 14 ]. Compared to traditional manufacturing methods, laser-based manufacturing is a widely used, noncontact, advanced manufacturing technique [ 15 ]. Selective laser melting (SLM) [ 16 , 17 ] is an important branch of additive manufacturing technology.…”