Large Dynamic Direct Shear Machine for Geosynthetic Clay Liners

Abstract

A large direct shear machina for static and dynamic shear strength testing of geosynthetic clay liners (GCLs) and GCL liner systems is described. The machine tests rectangular GCL specimens measuring 305 × 1067 mm and has a maximum shear displacement of 254 mm, which is sufficiently large to allow for the measurement of residual or near-residual shear strengths in most cases. The basic design concept for the device is to shear a GCL specimen between a bidirectional pullout plate and a stationary reaction plate, each covered with an aggressive gripping surface. The pullout plate is driven by a computer-controlled hydraulic actuator. The maximum normal stress is 2000 kPa, the maximum shear stress is 750 kPa, and the shearing system is capable of imposing general stress-controlled or displacement-controlled dynamic loading to a test specimen. The actuator has a maximum frequency of 4 Hz for sinusoidal loading with a displacement amplitude of 25 mm. The maximum displacement rate for burst loading (i.e., single thrust) at zero force is 1 m/s. The paper describes four main components of the machine: (1) the shearing system; (2) the normal stress and vertical displacement measurement system; (3) the specimen hydration system; and (4) the process control and data acquisition system. The performance of the machine is illustrated using displacement-controlled test data for the static and cyclic internal shear strength of a hydrated needle-punched GCL.

Effect of Temperature on Internal Shear Strength Mechanism of Needle-Punched GCL

“…GCL internal strength was measured by direct shear, ring shear, and inclined plate [5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20]. The direct shear apparatus with displacement control and stress control has some advantages and disadvantages.…”