Kinetic modelling of coking coal fluidity development

Abstract

Coal plasticity is a phenomenon directly affecting the creation of coke structure. It is very much a time-and temperaturedependent transformation of the coal matrix, which allows changing the physical phase from solid to liquid-like and again into solid of different properties. The coking process, particularly in a plasticization temperature range, can be considered as a non-isothermal reaction at a constant heating rate. In this work, a macro-kinetics approach is applied that results in effective kinetic parameters, i.e. pre-exponential factor and activation energy. It is postulated in this work that the original content of metaplast (M 0) is a part of volatile matter that melts under the effect of temperature. The coal sample can melt steadily with the temperature increase, achieving the maximum fluidity (F max) when the total amount of metaplast available turns into the plastic state. Coal behaviour while it is being heated can be described by two mechanisms. Under first one, the coal turns into plastic phase starting at t 1 and ending at t max , where solidification starts. This can be considered as independent reactions model. In the second model, both plasticization and solidification reactions compete over entire range of phenomena. This can be considered as reactions in the series model. The developed models were validated against experimental data of coal fluidity delivering kinetic parameters.