Isotope Labelling for Reaction Mechanism Analysis in DBD Plasma Processes

Abstract

Dielectric barrier discharge (DBD) plasmas and plasma catalysis are becoming an alternative procedure to activate various gas phase reactions. A low-temperature and normal operating pressure are the main advantages of these processes, but a limited energy efficiency and little selectivity control hinder their practical implementation. In this work, we propose the use of isotope labelling to retrieve information about the intermediate reactions that may intervene during the DBD processes contributing to a decrease in their energy efficiency. The results are shown for the wet reforming reaction of methane, using D2O instead of H2O as reactant, and for the ammonia synthesis, using NH3/D2/N2 mixtures. In the two cases, it was found that a significant amount of outlet gas molecules, either reactants or products, have deuterium in their structure (e.g., HD for hydrogen, CDxHy for methane, or NDxHy for ammonia). From the analysis of the evolution of the labelled molecules as a function of power, useful information has been obtained about the exchange events of H by D atoms (or vice versa) between the plasma intermediate species. An evaluation of the number of these events revealed a significant progression with the plasma power, a tendency that is recognized to be detrimental for the energy efficiency of reactant to product transformation. The labelling technique is proposed as a useful approach for the analysis of plasma reaction mechanisms.

Plasma-catalytic ammonia synthesis beyond thermal equilibrium on Ru-based catalysts in non-thermal plasma

“…At higher plasma power, however, ammonia may decompose in micro-discharges. 55,61,62 Fig. 8 shows good correlations between the NH 3 concentration measured at 450°C and plasma power.…”

Electrical and reaction performances of packed‐bed plasma reactors moderated with ferroelectric or dielectric materials

“…It has been previously used to study different plasma-catalysis reactions, as the synthesis of ammonia, methane reforming, or the elimination of pollutants. [2,5,7,8,20] Figure 1 shows a sketch of the reactor set-up. Upper and bottom SS electrodes were separated by a pellet bed formed by a single packed layer of 3-mm pellets made of either dielectric (alumina [Al 2 O 3 ] and glass beads) or ferroelectric materials (barium titanate [BaTiO 3 ] and lead zirconate titanate [PZT]), respectively.…”

Unraveling Discharge and Surface Mechanisms in Plasma-Assisted Ammonia Reactions

“…1.2% of the global CO 2 emissions . The requisite of combining the reduction of energy consumption with the production of ammonia in a distributed way close to final users has called for an active investigation of a variety or alternative processes, including plasma catalysis. − ,− A second motivation of this work is the use of ammonia as a suitable hydrogen storage vector and the advantages, with respect to classical catalysis, − of small plasma reactors for its low temperature decomposition into hydrogen, as required for mobile device applications.…”