Is Complexity of Hydraulic Fractures Tunable? A Question from Design Perspective

Low injected fracturing fluid recovery has been an issue during flowback period that is highly impacted by the fracture closure behavior. Although existing flowback models consider fracture closure volumetrically, they do not represent the true situation of non-uniform fracture closure. In this paper, we proposed a coupled geomechanics and fluid flow model for early-time flowback in shale oil reservoirs. The fluid flow model is coupled with an elastic fracture closure model through finite element methods. In this study, three stages are modeled: fracture propagation, well shut-in and flowback. Cohesive Zone Method (CZM) has been used for modeling fracture propagation. The presented model distinguished the propped part from the unpropped part of the fracture. At the beginning of flowback, the proppants may not be completely compacted in early shut-in time. Thus, permeability evolution during closure is tracked using a smooth permeability transition function. The numerical results have shown that fracture closure during the flowback period is often not uniform. While the uniform fracture closure leads to maximum fracturing fluid recovery, an aggressive pressure drawdown strategy may damage fracture connectivity to the wellbore. An integrated flowback model enables modelling nonuniform fracture closure in a complex fracture network. This study highlights that by choke/pressure drawdown management, operators can influence fluid recovery and even maintain high fracture conductivity. Furthermore, the methodology presented in the paper can also be used for inverse analysis on early flowback data.

show abstract

Toward Controllable Infill Completions Using Frac-Driven Interactions FDI Data

Cai

Taleghani

2021

Day 1 Tue, September 21, 2021

View full text Add to dashboard Cite

Infill completions have been explored by many operators in the last few years as a strategy to increase ultimate recovery from unconventional shale oil reservoirs. The stimulation of infill wells often causes pressure increases, known as fracture-driven interactions (FDIs), in nearby wells. Studies have generally focused on the propagation of fractures from infill wells and pressure changes in treatment wells rather than observation wells. Meanwhile, studies regarding the pressure response in the observation (parent) wells are mainly limited to field observations and conjecture. In this study, we provide a partialcorrective to this gap in the research.We model the pressure fluctuations in parent wells induced by fracking infill wells and provide insight into how field operators can use the pressure data from nearby wells to identify different forms of FDI, including fracture hit (frac-hit) and fracture shadowing. First,we model the trajectory of a fracture propagating from an infill well using the extended finite element methods (XFEM). This method allows us to incorporatethe possible intersection of fractures independent of the mesh gridding. Subsequently, we calculate the pressure response from the frac-hit and stress shadowing using a coupled geomechanics and multi-phase fluid flow model. Through numerical examples, we assess different scenarios that might arise because of the interactions between new fractures and old depleted fractures based on the corresponding pressure behavior in the parent wells. Typically, a large increase in bottomhole pressure over a short period is interpreted as a potential indication of a fracture hit. However, we show that a slower increase in bottomhole pressure may also imply a fracture hit, especially if gas repressurization was performed before the infill well was fracked. Ultimately, we find that well storage may buffer the sudden increase in pressure due to the frac-hit. We conclude by summarizing the different FDIs through their pressure footprints.

show abstract

Is Complexity of Hydraulic Fractures Tunable? A Question from Design Perspective

Cited by 3 publications

References 31 publications

Axial Fracture Initiation During Diagnostic Fracture Injection Tests and Its Impact on Interpretations

Axial Fracture Initiation During Diagnostic Fracture Injection Tests and Its Impact on Interpretations

Pursuing Improved Flowback Recovery after Hydraulic Fracturing

Toward Controllable Infill Completions Using Frac-Driven Interactions FDI Data

Contact Info

Product

Resources

About