Is An Orthodontic Hydrophilic Composite Resistant to Contamination and pH Cycling? In vitro Results

Abstract

Objective: To evaluate the adhesive strength of a hydrophilic composite submitted to contamination and pH cycling, compared to a conventional composite. Materials and Methods: Seventy-two bovine incisors were prepared and randomly divided into 6 groups (n=12), bonded with Hydrophilic Composite (HC)(Transbond Plus Color Change) or with Conventional Composite (CC)(Transbond XT; control), with or without contamination and pH cycling as follows: G1-HC, with contamination, with pH cycling; G2-HC, with contamination, without pH cycling; G3-HC, without contamination, with pH cycling; G4-HC, without contamination, without pH cycling; G5-CC, without contamination, with pH cycling; G6-CC, without contamination, without pH cycling. Contamination in G1 and G2 consisted of fresh saliva applied after the self-etching primer for 5min before bonding with HC. After bonding, G1, G3, and G5 were submitted to pH cycling, immersed in the demineralizing solution for 22h and for 2h in remineralizing artificial saliva, repeated for 15 days. G2, G4, and G6 were kept in deionized water. The shear bond strength was tested using a load cell of 100N and the Adhesive Remnant Index (ARI) was assessed. Intergroup comparison was performed with one-way ANOVA, Tukey, and chi-square tests. Results: There was a statistically significant difference in G1, G2, and G3 in relation to G6. The highest rate of adhesive failure between the resin/bracket interface occurred with the HC, while CC failed more at the resin/tooth interface. Conclusion: Contamination and pH cycling did not decrease the shear bond strength of brackets bonded with the hydrophilic composite. However, the adhesive strength of the conventional composite was higher.