Iron Oxide Nanorings and Nanotubes for Magnetic Hyperthermia: The Problem of Intraparticle Interactions

Abstract

Magnetic interactions can play an important role in the heating efficiency of magnetic nanoparticles. Although most of the time interparticle magnetic interactions are a dominant source, in specific cases such as multigranular nanostructures intraparticle interactions are also relevant and their effect is significant. In this work, we have prepared two different multigranular magnetic nanostructures of iron oxide, nanorings (NRs) and nanotubes (NTs), with a similar thickness but different lengths (55 nm for NRs and 470 nm for NTs). In this way, we find that the NTs present stronger intraparticle interactions than the NRs. Magnetometry and transverse susceptibility measurements show that the NTs possess a higher effective anisotropy and saturation magnetization. Despite this, the AC hysteresis loops obtained for the NRs (0–400 Oe, 300 kHz) are more squared, therefore giving rise to a higher heating efficiency (maximum specific absorption rate, SARmax = 110 W/g for the NRs and 80 W/g for the NTs at 400 Oe and 300 kHz). These results indicate that the weaker intraparticle interactions in the case of the NRs are in favor of magnetic hyperthermia in comparison with the NTs.

Filtration of Nanoparticle Agglomerates in Aqueous Colloidal Suspensions Exposed to an External Radio-Frequency Magnetic Field

“…Exposing the aqueous suspension of magnetic nanoparticles to an external RF magnetic field destabilizes the suspension ( Figure 1 ). The energy of the applied RF magnetic field absorbed by the magnetic nanoparticles is transferred in the form of heat into the aqueous solution [ 66 , 67 , 68 , 69 ]. The resulting increased mobility of the magnetic nanoparticles significantly increases the number of collisions between them.…”

Magnetic Nanoparticles in Medicine: Progress, Problems, and Advances

“…In addition, many aspects of medical devices and instruments are regulated by the International Organization for Standardization (ISO) ( www.iso.org ). To reach the final stage of real medical use, a new drug must go through several stages [ 69 , 174 , 175 ]. The first stage includes fundamental research, culminating in a detailed development of the scientific foundations of all elements of the new method.…”

Design and fabrication of a magnetic nanobiocomposite based on flaxseed mucilage hydrogel and silk fibroin for biomedical and in-vitro hyperthermia applications

“…In this non-invasive treatment, by applying an AMF and oscillating the magnetic moment of these forefront nanoparticles, the magnetic energy converts to heating energy. The temperature of tumor area is locally raised to destroy the cancerous cells and preventing the collateral damage to healthy cells 35 , 36 . The maintenance of colloidal stability, biocompatibility, and assessment of possible cytotoxicity of MNPs in physiological conditions play a critical role in determining their suitability for in vivo applications.…”