Investigations on the langasite resonators by X-ray topography

Abstract

In this paper the results of electrical measurements of the mass-loading influence on Y-cut langasite resonator parameters are compared with those obtained by X-ray topography analysis of the same resonators. Based on the Ballato's transmission-line analogs of the trapped-energy resonators vibrating in thickness-shear mode [1], the massloading effect on resonator characteristics was studied. The effective mass-loading, motional inductance and quality factor of langasite resonators were computed.Sawyer plan-parallel polished Y-cut langasite resonators with 14mm diameter, 5 MHz resonant frequency, Au electrodes of 7 mm diameters and various thickness were used in experiments.X-ray topography measurements were performed by conventional transmission Laue setting using the white beam synchrotron radiation on fundamental, third and fifth overtones. The results are in agreement with those obtained by electrical measurements.The comparison of X-ray diffraction topography images previously performed on AT-cut quartz resonators with X-ray topographs on langasite resonators pointed out that the Y-cut langasite resonators are less influenced by the mass-loading than the AT-cut quartz resonators.