Aluminum metal matrix composite (AMMC) is employed in all engineering applications, most notably as a substitute for conventional metals in the fields of defense, automotive, and aerospace. AMMC should have a wide variety of structural, mechanical, thermal, wear, and corrosion qualities that may require mutually exclusive features at an optimal level to achieve this. The current research focuses on the stir casting process for producing SiC and cenosphere reinforced Al7075 alloys. The response surface method's (RSM) face‐centered central composite design (CCD) was used to design the number of experimental trials, and a response surface technique was enforced to forecast the optimum combination of processing variables in the wear process. The SiC reinforcement improved the wear resistance of Al7075‐SiC‐cenosphere composites substantially. Overall, the experiments show that Al7075‐6 wt% SiC‐5 wt% cenosphere has excellent tribological properties. The hybrid Al7075/SiC/Cenosphere composites were shown to be effective, fit, and suitable in the ideal wear process parameters (load of 10 N, sliding distance of 1000 m, and sliding velocity of 1.5 m/s) for lowering wear rate (0.38035 × 10−3 mm3/m) at 6wt% SiC reinforced composite. This suggests that the combination of SiC and cenosphere improves the wear resistance of AMMC.