Investigation on the Preparation of Rice Straw-Derived Cellulose Acetate and Its Spinnability for Electrospinning

Abstract

Rice straw-derived cellulose (RSC) with purity of 92 wt.% was successfully extracted from rice straw by a novel and facile strategy, which integrated the C2H5OH/H2O autocatalytic process, dilute alkali treatment and H2O2 bleaching process. Influencing factors of the cellulose extraction were systematically examined, such as ethanol concentration, alkali concentration, H2O2 bleaching process and so on; the optimal extraction conditions of cellulose was determined. A series of rice straw-derived cellulose acetate (RSCA) with different degree of substitution (DS) were prepared by the acetylation reaction; the effects of Ac2O/cellulose ratio, reaction temperature and reaction time on the acetylation reaction were investigated. Results of FTIR and XRD analysis demonstrated that highly purified RSC and RSCA were prepared comparing with the commercial cellulose and cellulose acetate. Solubility analysis of RSCA with different DS indicated as-prepared RSCA with DS of 2.82 possessed the best solubleness, which was suitable for electrospinning. Moreover, the flexible RSCA fibrous membrane was easily fabricated by a facile electrospinning method. Our proposed method provided a strategy for realizing the high-value utilization of waste rice straw resource, as prepared RSC and RSCA can be used as chemical raw material, and electrospun RSCA fibrous membrane has various applications in medical materials, food packaging, water purification and so on.

New Insights into Green Food Preservation: “Armored” Lignin Nanoparticles as Promising Antioxidant-cum-Antimicrobial Agents

“…The characteristic diffraction peak at 22.4°observed in the CA membrane was attributed to the typical lattice characteristic peaks of cellulose Iβ. 26 For the CA fiber doped with three types of AS-lignin NPs, only the characteristic amorphous phase of CA is observed in its amorphous structure. This suggests that the CA membrane was doped with lignin without undergoing any chemical reaction.…”

“…The XRD patterns are displayed in Figure S4. The characteristic diffraction peak at 22.4° observed in the CA membrane was attributed to the typical lattice characteristic peaks of cellulose Iβ . For the CA fiber doped with three types of AS-lignin NPs, only the characteristic amorphous phase of CA is observed in its amorphous structure.…”