Investigation of the Conjugate Heat Transfer and Flow Field for a Flat Plate with Combined Film and Impingement Cooling

Fu, Jun; Cao, Ying; Zhang, Chao; Zhu, Jihong

doi:10.1007/s11630-020-1233-2

Cited by 16 publications

(1 citation statement)

References 23 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Therefore, an effective cooling technique is required to ensure the normal work of the engine. The double-wall structure combined with internal jet impingement [1,2], pin fins [3][4][5] and the external film cooling [6][7][8] is one of the most effective cooling techniques used in many engineering applications, such as turbine vane/blade, power electronics, heat exchangers, etc. [9].…”

Section: Introductionmentioning

confidence: 99%

Experimental Study of Heat Transfer on the Internal Surfaces of a Double-Wall Structure with Pin Fin Array

Zhang

Zhu

2020

Energies

View full text Add to dashboard Cite

The double-wall structure is one of the most effective cooling techniques used in many engineering applications, such as turbine vane/blade, heat exchangers, etc. Heat transfer on the internal surfaces of a double-wall structure was studied at impinging Reynolds numbers ranging from 1 × 104 to 6 × 104 using the transient thermochromic liquid crystal (TLC) technique. The two-dimensional distributions of Nusselt numbers and their averaged values were obtained on the impingement surface, target surface and the pin fin surface. The Nusselt number correlations on the surfaces mentioned above were determined as a function of Reynolds number. The results show that the second peak values of the Nusselt number distribution appear on the target surface at all Reynolds numbers studied in this paper for a short distance of the target surface to impingement surface. This phenomenon becomes significant with the further increase of the Reynolds number. The difference between the Nusselt number at the second peak and the stagnation point decreases with the increasing Reynolds number. The maximal Nusselt number regions on the impingement surface appear at the left and right sides of the pin fins between the two impingement holes. The Nusselt numbers of the pin fin surfaces are highly dependent on their various locations in the double-wall structures. The contributions of the impingement surface, pin fin surface and target surface to the overall heat transfer rate are analyzed. The target surface contributed the largest amount of heat transfer rate with a value of about 62%. The heat transfer contribution is from 18% to 21% for the impingement surface and 16% to 18% for the pin fin surfaces within the studied Reynolds numbers.

show abstract