Investigation of Temperature Effects into Long-Span Bridges via Hybrid Sensing and Supervised Regression Models

Abstract

Temperature is an important environmental factor for long-span bridges because it induces thermal loads on structural components that cause considerable displacements, stresses, and structural damage. Hence, it is critical to acquire up-to-date information on the status, sustainability, and serviceability of long-span bridges under daily and seasonal temperature fluctuations. This paper intends to investigate the effects of temperature variability on structural displacements obtained from remote sensing and represent their relationship using supervised regression models. In contrast to other studies in this field, one of the contributions of this paper is to leverage hybrid sensing as a combination of contact and non-contact sensors for measuring temperature data and structural responses. Apart from temperature, other unmeasured environmental and operational conditions may affect structural displacements of long-span bridges separately or simultaneously. For this issue, this paper incorporates a correlation analysis between the measured predictor (temperature) and response (displacement) data using a linear correlation measure, the Pearson correlation coefficient, as well as nonlinear correlation measures, namely the Spearman and Kendall correlation coefficients and the maximal information criterion, to determine whether the measured environmental factor is dominant or other unmeasured conditions affect structural responses. Finally, three supervised regression techniques based on a linear regression model, Gaussian process regression, and support vector regression are considered to model the relationship between temperature and structural displacements and to conduct the prediction process. Temperature and limited displacement data related to three long-span bridges are used to demonstrate the results of this research. The aim of this research is to assess and realize whether contact-based sensors installed in a bridge structure for measuring environmental and/or operational factors are sufficient or if it is necessary to consider further sensors and investigations.

Optimizing Faulting Prediction for Rigid Pavements Using a Hybrid SHAP-TPE-CatBoost Model

“…Setting hyperparameters is a complicated process that can significantly affect model performance. A Python library, TPE, employs a Bayesian optimization algorithm and surrogate targets to promptly and accurately determine the optimal hyperparameters, thus enhancing the model's performance [16][17][18][19]. Combining the Boruta algorithm improves both the speed and quality of feature selection.…”

A Parsimonious Yet Robust Regression Model for Predicting Limited Structural Responses of Remote Sensing

“…The choice of an appropriate sensing technology and of the measurement of the structural response to different natural or man-made excitation sources is critical to provide data sensitive to the structural state. The process of data analytics is often conducted through data cleaning, compression, fusion [10], data augmentation [11], data prediction [12], data normalization [13], and feature extraction [14]. Different machine learning algorithms within the realms of unsupervised learning [15][16][17][18] and supervised learning [19] can be adopted for decision-making about whether the bridge has suffered damage or can still operate normally.…”

A Comparative Study on Structural Displacement Prediction by Kernelized Regressors under Limited Training Data

“…The best solution is thus to leverage data expansion techniques. From the viewpoint of regression modeling, support vector regression (SVR) and Gaussian process regression (GPR) are two supervised regressors developed from the concept of kernel trick that expand a low-dimensional feature space to a high-dimensional one with a different kernel function [26,27]. However, the performance of these techniques in the presence of small datasets and the consideration of a limited training ratio have not been explored properly for SAR-based SHM.…”