Investigation of Spontaneous Imbibition by Using a Surfactant-Free Active Silica Water-Based Nanofluid for Enhanced Oil Recovery

Abstract

Interests in using nanofluids for enhanced oil recovery (EOR) applications has been increasing. Herein, a novel surfactant-free water-based nanofluid for EOR was constructed using active silica nanoparticles. Active silica nanoparticles were synthesized via condensation of hexanedioic acid with the −OH group of silica. Water-based nanofluid was obtained by transforming carboxyl into carboxylate on the surface of active silica nanoparticles in water. The particle size of the active silica nanoparticles in water ranged from 10 to 20 nm. The interfacial activity of the nanoparticles was endowed through the shape change of the active silica nanoparticle surface groups to minimize their interface energy. The morphology and surface components of the active silica nanoparticles were characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. The interfacial activity of the active silica nanoparticles was proved through interfacial tension and interfacial dilational modulus measurements. Active silica nanoparticles exhibited a stronger ability to reduce interfacial tension and enhance the interfacial film strength than silica nanoparticles. Contact angle measurements showed that this nanofluid exhibited excellent capabilities of oil displacement from a solid surface and wettability alteration. Spontaneous imbibition tests of ultralow permeability cores using different liquid phases (active silica nanofluid, silica nanofluid and brine) were conducted. Oil recovery using active silica nanofluid was higher than that of using silica nanofluid or brine. Active silica nanofluid at a low concentration could display an equal EOR efficiency with highly concentrated silica nanofluid. These results indicated the possible application of the proposed active silica water-based nanofluid in EOR. This preparation method could be used to prepare surfactant-free active nanofluids, and the surfactant-free active nanofluid shows great potential for EOR applications.

Green synthesise of CuO@Fe 3 O 4 @Xantan nanocomposites and its application in enhanced oil recovery by considering IFT and wettability behaviours

“…12 illustrates the measured values of contact angles of the various aqueous systems. Initially, the contact angle of the system was measured without the presence of the synthesised NCs, which was 134°t hat indicates a strong oil-wet system [42][43][44][45][46][47]. Afterwards, the effect of the synthesised NCs on the wettability alteration was investigated by measuring the contact angle of different crude oil/ nanofluids systems.…”

Facile Use of Silver Nanoparticles-Loaded Alumina/Silica in Nanofluid Formulations for Enhanced Catalytic Performance toward 4-Nitrophenol Reduction

“…In addition to thermal conductivity, the electrical conductivity of the NF is also measured for different volume fractions at different temperatures. Many studies have been conducted on the preparation of SiO 2 NF [ 22 , 23 ]. Yan et al studied the thermophysical characteristic of SiO 2 /water NF and its heat transfer enhancement with the field synergy principle [ 24 ].…”

Giant surfactant-stabilized N2-foam for enhanced oil recovery after water flooding

“…7 Besides, the weak viscoelasticity and mechanical strength of small-molecule surfactant foams make them easily ruptured under external shear stress during formation. [8][9][10] Considering the above problems, many researchers have added polymers with good viscosifying and thickening properties to the foaming solution to improve the foam stability and viscoelasticity. Nowadays, the commonly used polymer stabilizers can be divided into two types, namely, hydrophilic polymers (such as polyacrylamide, 11 xanthan gum 4,9 and guar gum 12 ) and amphiphilic copolymers (hydrophobically modied polyacrylamide, such as B192 (ref.…”