Investigation of EMF Exposure Level for Uplink and Downlink of 5G Network Using Ray Tracing Approach

Abstract

To provide enhanced mobile services, the 5G system is expected to further densify its network infrastructure and scale up the deployment of massive antenna arrays that emit highenergy beams using the millimeter wave spectrum. These radically new features will significantly impact the EMF exposure level in the 5G networks. In this paper, EMF exposure for 5G mobile networks in a dense urban environment is investigated using a raytracing approach for the uplink (UL) and downlink (DL). A massive multi-input multi-output antenna with multiuser beamforming capability is considered for the 5G base station. For DL, the maximum rate transmission (MRT) technique is used to direct the beams toward all the active users, and total power density (PD) is used to evaluate the EMF exposure level. On the other hand, EMF exposure due to UL is investigated using electric field strength and specific absorption rate (SAR). The proposed ray-tracing based EMF evaluation framework exploits detailed information of the scenarios, including 3D building geometry, EM characteristics, multipath propagation, user locations and beamforming radiation pattern, to effectively evaluate the EMF's spatial variation levels. Following this evaluation procedure, the impact of different user densities and distributions is analyzed in terms of PD and SAR. Results show that for DL, the peak PD increases from 6.65 to 24.92 dBm/m 2 when the number of active users in the area increases from a single user to 100%. Considering the worst-case scenario, the PD exposure reaches 62% of the ICNIRP's limit. Saturation of the spatial EMF distribution occurs when the number of active DL beams is above 25%. For UL, within 5m radius of the user's location, the average E-field may increase from 2.40 to 3.98 V/m. (increment of 66%) if the number of active users in the area increases from 25% to 100%. Moreover, when 100% of the users are actively transmitting, there is only a 10% probability that the SAR may exceed 0.06 W/kg (or 3% of the ICNIRP's limit).

Performance Evaluation of Anomaly Detection System on Portable LTE Telecommunication Networks Using OpenAirInterface and ELK

“…This, along with the need for better performance anomaly detection, motivate us to set up the experiment and conduct a performance evaluation. Despite of extensive research has been done in the effort of modeling and simulating the behavior of telecommunication network (Salem et al, 2022;Tan et al, 2022;Lukman et al, 2022), telecommunication operators need real platform to conduct more realistic experiment and measurement, and identify unexpected or anomalous result. To conduct anomaly detection research ideally on cellular telecommunications networks, a realistic research environment representing the actual condition is preferred.…”

Machine Learning Modeling for Radiofrequency Electromagnetic Fields (RF-EMF) Signals From mmWave 5G Signals

“…The use of higher frequencies for arranging in 5G networks must also be considered. This unique and complicated radiation pattern of the 5G-BS antenna results from distinct propagation and diffraction conditions caused by such frequencies [10,16]. The pattern should include an envelope of all radio beams that have been emitted.…”