Investigating Created Properties of Nanoparticles Based Drilling Mud

Ghasemi, Nahid; Mirzaee, Mojtaba; Aghayari, Reza; Maddah, Heydar

doi:10.1007/s00231-017-2229-7

Cited by 18 publications

(8 citation statements)

References 2 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Xanthan gum has used as a highly beneficial drilling mud additive that reduces related well instabilities [33,34]. Xanthan gum also, can be used in other applications such as an emulsifier, stabilizer (in some cases), a thickener for mud systems and suspending agent [34][35][36][37].…”

Section: Drilling Fluidsmentioning

confidence: 99%

Green Polymers and Their Uses in Petroleum Industry, Current State and Future Perspectives

Abdel-Raouf¹,

Keshawy²,

Hasan³

2022

Crude Oil - New Technologies and Recent Approaches

View full text Add to dashboard Cite

The concept of green chemistry has been established to find safe methodologies and environmentally benign solutions for the present and the onset problems. In this regard, extensive work has been carried out worldwide to replace the currently used materials with green ones. The terminology green relies on all the non-pollutive or the degradable materials regardless of their source. Therefore, there are biobased green materials and non-biobased green materials. This review sheds light on several green polymers used in different petroleum industries. The polymers are reviewed according to the stage of oil processing in which they are applied. Furthermore, different modification methodologies of natural polymers are revised. Also, the role of green non-biopolymers in different petroleum industries is investigated. It is worth mentioning that we concentrate our efforts on the utilization of different natural polymers in petroleum applications. Thereafter, some natural polymers such as chitosan and cellulose and their derivatives were specifically reviewed.

show abstract

Section: Drilling Fluidsmentioning

confidence: 99%

Green Polymers and Their Uses in Petroleum Industry, Current State and Future Perspectives

Abdel-Raouf¹,

Keshawy²,

Hasan³

2022

Crude Oil - New Technologies and Recent Approaches

View full text Add to dashboard Cite

show abstract

“…In smaller formations, the polymer does not affect the weight of the drilling mud. They have a covering on them that reduces their contact with one another and the possibility of agglomeration (Ghasemi et al, 2018). A lower fluid loss rate leads to better cake formation, which is preferred in drilling operations (Dehghani, Kalantariasl, Saboori, Sabbaghi, & Peyvandi, 2019).…”

Section: Drilling Fluid Filtration Studiesmentioning

confidence: 99%

Production of water-based mud for drilling operation application

Ridzuan

Ding

Mathew

et al. 2021

Maejo Int. J. Energ. Environ. Comm. or MIJEEC

View full text Add to dashboard Cite

A successful drilling operation is heavily dependent on the effectiveness of the drilling fluid's design in use. This study attempts to evaluate the rheological and filtration properties of water-based drilling mud (WBDM) upon the addition of Stearyl Acrylate-Behenyl Acrylate (SABA) copolymer, silicon dioxide (SiO2), and nickel (III) oxide (Ni2O3) nanoparticles. This SABA copolymer-nanofluid was prepared by dissolving the nanofluid in a SABA polymer solution and homogenizing it using ultrasonication. The properties were studied using mud balance, viscometer, and low-pressure low-temperature (LPLT) filter press. The rheological and filtration properties of SABA copolymer were found to imply that it could improve drilling fluid performance. However, the addition of nanoparticles gave a better performance of rheological and filtration properties on WBDM. SABA copolymer with 5000 ppm concentration shows the best performance due to showing the highest viscosity compared to basic drilling fluid. Also, the addition of 800 ppm of Ni2O3 concentration into 5000 ppm of SABA shows the lowest fluid losses. The experimental results indicate that SABA copolymer shows a great potential application and the addition of nanoparticles shows that nanotechnology has a lot of potentials to improve WBM performance

show abstract

“…Their results showed that the production of inorganic nanoparticles in a polymer solution does not require solvent through the reaction in the molten phase [42]. Moreover, the influence of adding Al 2 O 3 and TiO 2 nanoparticles into the drilling mud was studied by Ghasemi et al [43]. The size of Al 2 O 3 and TiO 2 nanoparticles were 20 and 60 nm, respectively, and a concentration of 0.05 wt.…”

Section: Introductionmentioning

confidence: 99%

Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network

et al. 2020

Self Cite

View full text Add to dashboard Cite

In this paper, an artificial neural network is implemented for the sake of predicting the thermal conductivity ratio of TiO2-Al2O3/water nanofluid. TiO2-Al2O3/water in the role of an innovative type of nanofluid was synthesized by the sol–gel method. The results indicated that 1.5 vol.% of nanofluids enhanced the thermal conductivity by up to 25%. It was shown that the heat transfer coefficient was linearly augmented with increasing nanoparticle concentration, but its variation with temperature was nonlinear. It should be noted that the increase in concentration may cause the particles to agglomerate, and then the thermal conductivity is reduced. The increase in temperature also increases the thermal conductivity, due to an increase in the Brownian motion and collision of particles. In this research, for the sake of predicting the thermal conductivity of TiO2-Al2O3/water nanofluid based on volumetric concentration and temperature functions, an artificial neural network is implemented. In this way, for predicting thermal conductivity, SOM (self-organizing map) and BP-LM (Back Propagation-Levenberq-Marquardt) algorithms were used. Based on the results obtained, these algorithms can be considered as an exceptional tool for predicting thermal conductivity. Additionally, the correlation coefficient values were equal to 0.938 and 0.98 when implementing the SOM and BP-LM algorithms, respectively, which is highly acceptable.

show abstract

Investigating Created Properties of Nanoparticles Based Drilling Mud

Cited by 18 publications

References 2 publications

Green Polymers and Their Uses in Petroleum Industry, Current State and Future Perspectives

Green Polymers and Their Uses in Petroleum Industry, Current State and Future Perspectives

Production of water-based mud for drilling operation application

Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network

Contact Info

Product

Resources

About