Intraspecific variation in spermoderm pattern of tribe Acacieae (Mimosoideae) using scanning electron microscopy techniques

Ullah

et al. 2021

Self Cite

Investigation of alternative energy sources is need of current time due to growing power crisis and associated environmental issues. Biodiesel is considered as sustainable power source and promising alternative to fossil fuels. Therefore, our current investigation aimed to identify micromorphological characters of 10 novel nonedible oil-yielding seeds through scanning electron microscopy. It was revealed from light microscopic study that there is variation in seed size from 3 to 15 mm in length and 2 to 11 mm in width. Likewise, a huge variation in color was observed such as light green, greenish yellow, blackish brown, and various shades of brown. Presence and absence of Hilum was observed, and compression of seeds varied from depressed, lateral, and dorsoventral. Seed's shape differs from ovate, clavate, triangular ovate, cuneiform, ovoid, and elliptical shape. Seed oil content fall in range of 18-58% (wt/wt). Free fatty acid content of the seeds varies from 0.3 to 3.1 mg KOH/g. Ultrastructure of seeds exhibited huge variation in shape, size, periclinal wall, anticlinal wall, and surface ornamentation. Nonedible seeds varied in wall structure from angular, wavy, dentate entire, irregular, puzzled, elongated, even, and polygonal.The periclinal wall arrangements show alteration from flat, looped, raised, depressed, lofty, even, pentagonal, polygonal, and undulate seed margins. Outcomes of this investigation recommended that scanning electron microscopy could act as a helpful tool in disclosing the hidden micromorphological characters among nonedible oilyielding seeds and subsequently helping in correct, authentic seed identification and classification as potential feedstock for biodiesel.

Section: Methodsmentioning

confidence: 99%

Microscopic techniques for characterization and authentication of oil‐yielding seeds

Aziz

Ullah

et al. 2021

Self Cite

“…Six taxa had fine texture including; C. fistula , P. aculeata , D. sissoo , S. grandiflora , S. sesban , and P. pinnata . Two taxa had coarse texture including ; A. lebbeck and S. alata , The fine and medium sinuate texture was noticed in P. dulce , P. glandulosa , T. indica , and P. juliflora (Alam et al, 2019) (Tables 3 and 4).…”

Section: Resultsmentioning

confidence: 98%

Implication of scanning electron microscopy in the seed morphology with special reference to three subfamilies of Fabaceae

Waheed

Ghufran

et al. 2021

Self Cite

The current research work was aimed to determine the morphological variation in the seeds of subfamilies Caesalpinioideae, Mimosoideae, and Papilionoideae using scanning electron microscope to investigate the different seed features including; Seed length, width, weight, hilum shape, position, fracture line pattern, pleurogram shape, texture crudeness, ornamentation wall, and surface ornamentation. A total of 12 species were collected. The study reveals that the seed types alters from psilate to rugose, pleurogram shape from lunar to U shape, hilum shape from elliptical to depressed, hilum position from terminal to subterminal, fracture line pattern from reticulate irregular ridges to psilate with regular ridges, texture crudeness from fine to coarse, surface ornamentation from reticulate to psilate, and ornamentation wall also varies from thin to thick. In all the studied species, it was found that seed surface was brown in color except in Senna alata, in which seed surface was black. Regarding the seed size, it was found that the smallest seed was observed for Sesbania sesban, while the largest seed was observed for Pongamia pinnata. The present research article indicates the taxonomic significance of seed morphology in the subfamilies Caesalpinioideae, Mimosaceae, and Papilionoideae.

“…scanning electron microscopy (Alam et al, 2019;Waheed et al, 2021). For quantitative examination, SEM is a powerful technique which determines the morphological structure of seeds such as ornamentation, surface, and seed sculpturing, which could not be made possible through light microscopy (Arshad et al, 2019;Rashid et al, 2018).…”

Section: Resultsmentioning

confidence: 99%

Scanning electron microscopy as a tool for authentication of biodiesel synthesis from Linum usitatissimum seed oil

Niazi

Elnaggar

et al. 2021

Self Cite

Utilization of renewable and alternative energy feedstocks such as nonedible seeds oil to deal with the increasing energy crises and related ecological concerns have gained the attention of researchers. Biodiesel is an efficient and renewable substitute for diesel engine. This work investigates the potential of inexpensive nonedible seed oil of Linum usitatissimum to synthesize biodiesel using iron sulfate green nanocatalyst through the process of transesterification. Flax seed contains about 37.5% oil content estimated through Soxhlet apparatus. Light microscopy revealed that seed size varies from 3.0 to 6.0 cm in length, 2.0 to 3.3 cm in width, and 0.7 to 1.0 mm in diameter. Color of seed varied from yellow to brown. Characterization of biodiesel is performed through GC–MS and FTIR. Scanning electron microscopy was carried out to study the morphological features of seed coat. Catalyst was characterized by scanning electron microscopy, energy diffraction X‐ray, and X‐ray diffraction. The diffraction peaks of Fe3O4 green nanoparticles were found to be in 2θ values, 30.24°, 35.62°, 38.26°, 49.56°, 57.12°, and 62.78°. Fuel properties of biodiesel are also determined and compared with ASTM standards. Linum usitatissimum biodiesel has density 0.8722 (15°C kg/L), kinetic viscosity 5.45 (40°C cSt), flash point (90°C), pour point (−13°C), cloud point (−9°C), sulfur (0.0432% wt), and total acid number (0.245 mg KOH/g). It is concluded that L. usitatissimum seed oil is a highly potential source for biodiesel production to cope with the challenge of present energy demand.