Interparticle diffusion and thermodynamic modeling studies for the removal of heavy metals using mixed adsorbents in industrial effluents

Abstract

Pollution of water, air, and soil by industrial effluents is a major problem nowadays. A variety of contaminants are too responsible for changing the physicochemical properties of the receiving body. There are practical treatment solutions available to clean up contaminants from various resources. The term "adsorption" refers to one of them.The purpose of the research work is to remove heavy metals from industrial effluent.Mixed adsorbents prepared from activated charcoal and bone charcoals were used to remove the copper and cadmium ions. The experiment carried out in a batch operation and modeling of these data for intraparticle diffusion and thermodynamic calculations were reported in this research work. At optimum operating condition pH 6; metal ion concentration 50 mg/L; dose 5 g/L; agitation 180 rpm and temperature 40 • C maximum 99.41% copper ions and 88.12% cadmium ion removal was achieved. Cadmium ions were well fitted in the thermodynamic model compared to copper ions, as demonstrated by the higher correlation coefficient R 2 (0.9824) value. Intra particle diffusion demonstrated that film diffusion was a rate-limiting step at the start of the reaction, while microporous intraparticle diffusion was the rate-determining phase later on. A Fourier transformation infrared spectroscopy, X-ray diffraction, and scanning electron micrography analysis confirmed the suitability of mixed adsorbents for the removal of cadmium and copper metal ions.