Internal Hydration Properties of Single Bacterial Endospores Probed by Electrostatic Force Microscopy

Abstract

We show that the internal hydration properties of single Bacillus cereus endospores in air under different relative humidity (RH) conditions can be determined through the measurement of its electric permittivity by means of quantitative electrostatic force microscopy (EFM). We show that an increase in the RH from 0% to 80% induces a large increase in the equivalent homogeneous relative electric permittivity of the bacterial endospores, from ~4 up to ~17, accompanied only by a small increase in the endospore height, of just a few nanometers. These results correlate the increase of the moisture content of the endospore with the corresponding increase of environmental RH. 3D finite element numerical calculations, which include the internal structure of the endospores, indicate that the moisture is mainly accumulated in the external layers of the endospore, hence preserving the core of the endospore at low hydration levels. This mechanism is different from what we observe for vegetative bacterial cells of the same species, in which the cell wall at high humid atmospheric conditions is not able to preserve the cytoplasmic region at low hydration levels. These results show the potential of quantitative EFM under environmental humidity control to study the hygroscopic properties of small scale biological (and non-biological) entities and to determine its internal hydration state. A better understanding of nano-hygroscopic properties can be of relevance in the study of essential biological processes and in the design of bio-nanotechnological applications. KEYWORDSElectrostatic Force Microscopy, bacterial endospores, relative humidity, electric permittivity, nano-hygroscopicity.

A case study of the electrical properties of astrocytes by multimode AFM

“…D and H), it can be indicated that the median values are 1.51 ± 0.31 and 1.98 ± 0.32 zF nm –1 , respectively. The capacitance gradient of the cell body and filaments were lower than PC12 cells and hippocampal neurons, and also lower than cells that not belong to the nervous systems (such as bacteria Salmonella typhimurium and Bacillus cereus endospores) (Esteban‐Ferrer et al ., ; Van Der Hofstadt et al ., ; Zhao et al ., ). As the electrical polarisation properties of the samples are inferred by the capacitance gradient, changes in these values depict different electrical polarisation responses.…”

Quantitative phase‐mode electrostatic force microscopy on silicon oxide nanostructures

“…These techniques were proven useful in studying the localization of trapped charges in thin films (Silveira & Marohn, 2004; Chen et al ., 2005a; Chen et al ., 2005b; Muller & Marohn, 2005), quantum dots (Tevaarwerk et al ., 2005) and nanotubes (Chin et al ., 2008); to measure the resistance at metal–semiconductor interfaces and grain boundaries in operating devices (Annibale et al ., 2007); to relate electrical properties, such as dielectric permittivity (Gramse et al ., 2009; El Khoury et al ., 2016; Fumagalli et al ., 2018), conductivity (Castellano‐Hernández & Sacha, 2015; Aurino et al ., 2016), piezoelectricity (Moon et al ., 2017) and percolation pathways (Barnes & Buratto, 2018), directly to the organization of the material at the mesoscopic length scales. Charge distribution in supramolecular architectures (Dabirian et al ., 2009; Borgani et al ., 2014; Garrett et al ., 2018), biomolecules (Gil et al ., 2002; Cuervo et al ., 2014; Dols‐Perez et al ., 2015; Lozano et al ., 2018; Lozano et al ., 2019), living organism (Esteban‐Ferrer et al ., 2014; Van Der Hofstadt et al ., 2016a; Van Der Hofstadt et al ., 2016b) and 2D materials (Collins et al ., 2013; Miyahara et al ., 2015; Shen et al ., 2018; Altvater et al ., 2019) was recently addressed with these techniques. The information obtained can be used as input for the design and optimization of device layouts, and ultimately for the simulation of functional devices and circuits.…”

Experimental and Numerical Analyzes of a Sensor Based on Interdigitated Electrodes for Studying Microbiological Alterations

“…The resulting numerical value for the electrical permittivity that represents the intact spore layer can be compared with literature values. In the study performed by van der Hofstadt et al, the permittivity of B. cereus spores was evaluated at different humidity levels to be in the range of 4–17 . In the present article, we were able to derive the frequency‐dependent electric properties of the spore layer at different states as finite values.…”