Integration of Statistical Quality Control (SQC) and Fault Tree Analysis (FTA) in the quality control of resina colophonium production in Company X

Abstract

Resina colophonium is a product that is produced from the processing of pine sap. This product is widely used for adhesives, additives for beauty products and mixtures of paints and varnishes. One of the companies engaged in the production of resina colophonium is Company X. Production process is an important aspect of the company, so any problems must be avoided to eliminate product defects. One way that can be done to avoid problems in the production process is to carry out proper quality control. The purpose of this study was to analyze the quality control of the production process at Company X. The quality control method used is the integration of the Statistical Quality Control (SQC) method to determine the frequency of problems and Fault Tree Analysis (FTA) to complete identification by looking for the causes of these problems so that problem did not repeat. Based on the results of the quality control analysis, it is found that the most serious problem that affects the quality of the production process lies in the labor aspect with a value number is 38.46% and the root of the potential cause is the number of workers who are not following the current work.

Implementation of Statistical Quality Control (SQC) As a Quality Damage Control for Crepes Products in the Indonesian Food Industry

“…The highest number of defects or frequent occurrences is that the flaky tip defects are a priority in repairs. The Pareto diagram serves to find out the source of the most frequently encountered defects or product defects or the types of defects that occur most often so that it can help companies identify the causes of the biggest defects to make improvements [3]. After knowing the most defects, the Pareto diagram is made based on the data.…”

“…Production is an important aspect and key to success for every company, the problems should be avoided to remove the product's defects. Increasing quality control is an effective way to avoid problems that could happen [3]. Quality control is a form of activities associated with the production process, the quality control is a system of verification and maintenance, or the desired progress with IOP Publishing doi:10.1088/1755-1315/1246/1/012048 2 careful planning, good use of equipment, continuous checks, and action improvement when needed [4].…”

Analisis Masalah Kerusakan Pada Pabrik Daur Ulang Beton Hasil Konstruksi PT XYZ

“…Management and Business Review, 20 (3), 2023, 240- Grafik Pareto pada dasarnya adalah bar chart yang tampilannya diurutkan dari jumlah frekuensi terbesar hingga terkecil. Grafik Pareto membantu perusahaan mengetahui produk atau isu yang memiliki kontribusi signifikan (Gaidhane et al, 2022) dan perlu menjadi prioritas (Rucitra & Amna, 2021). Grafik Pareto dikenal pula dengan nama 80/20 rule.…”

Ribbed Smoke Sheet (Rss) Product Quality Control Using Statistical Quality Control (Sqc) at Pt. Xyz

“…Seharusnya mesin harus dilakukan perawatan dan pengontrolan secara berkala sehingga tidak mengakibatkan slab rusak dan tidak bisa diproduksi RSS karena peralatan yang kurang bersih akan menghambat proses pengolahan. Mesin yang kurang mengalami kerusakan dapat mengakibatkan terhambatnya proses produksi, menambah biaya pengeluaran perusasahaan dan kualitas produk yang dihasilkan kurang optimal (Rucitra & Amna, 2021). Menurut Amrina & Andryan (2019), mesin merupakan faktor utama yang menyebabkan banyaknya pemborosan pada proses produksi pengolahan karet.…”