Integration of Multijunction Absorbers and Catalysts for Efficient Solar‐Driven Artificial Leaf Structures: A Physical and Materials Science Perspective

Abstract

Artificial leaves could be the breakthrough technology to overcome the limitations of storage and mobility through the synthesis of chemical fuels from sunlight, which will be an essential component of a sustainable future energy system. However, the realization of efficient solar‐driven artificial leaf structures requires integrated specialized materials such as semiconductor absorbers, catalysts, interfacial passivation, and contact layers. To date, no competitive system has emerged due to a lack of scientific understanding, knowledge‐based design rules, and scalable engineering strategies. Here, we will discuss competitive artificial leaf devices for water splitting, focusing on multi‐absorber structures to achieve solar‐to‐hydrogen conversion efficiencies exceeding 15%. A key challenge is integrating photovoltaic and electrochemical functionalities in a single device. Additionally, optimal electrocatalysts for intermittent operation at photocurrent densities of 10‐20 mA cm‐2 must be immobilized on the absorbers with specifically designed interfacial passivation and contact layers, so‐called buried junctions. This minimizes voltage and current losses and prevents corrosive side reactions. Key challenges include understanding elementary steps, identifying suitable materials, and developing synthesis and processing techniques for all integrated components. This is crucial for efficient, robust, and scalable devices. Here, we discuss and report on corresponding research efforts to produce green hydrogen with unassisted solar‐driven (photo‐)electrochemical devices.This article is protected by copyright. All rights reserved.