Integration of Latest Laboratory, Software and Retarded Acid Technologies to Increase Efficiency of Acid Treatments in Carbonates: Case Studies from Central Asia

Abstract

Acidizing treatments in carbonates often result in significant skin decrease due to high reactivity of the formation with acids. Noticeable production increase or inability to run analysis tools after the treatment may lead to the conclusion that the matrix acidizing job was performed efficiently, when, in fact, the job was not optimized in terms of fluid volumes, acid types, wellbore coverage, and pumping rates. As a result, the final skin is not as low as it could be, and, most importantly, medium - and long-term post-acidizing production decline is faster than it could be with an optimized treatment. To overcome these concerns, an integrated approach to acidizing treatments was implemented for different oil fields in Kazakhstan. The integrated approach consists of comprehensive laboratory testing, which includes core flow tests with subsequent 3D computer tomography scanning. The tests help to determine wormholing regimes and channel geometry while providing calibration points for acid-rock interaction curves. These coefficients are used in the acidizing modeling software, which enables optimization of fluid volumes, pumping rates, and diversion strategy. The approach suggests the use of a single-phase retarded acid system is the most effective method of keeping the treatment in the dominant wormhole regime, especially at elevated temperature. The integrated approach loop is closed by the analysis of the distributed temperature sensor data to calibrate the efficiency of diversion and reservoir injectivity profile. The approach was introduced for different oil fields in Kazakhstan, with a variety of conditions: depths up to 5000 m and temperatures up to 145°C. The approach helped to optimize acid volumes by as much as 44% to achieve an optimum skin. In the mid-term perspective, this approach helped to reduce the production decline rate by at least 20%, and ongoing post-treatment analysis is even more promising.

Results of Laboratory Studies of Acid Treatment of Low-Permeability Rock Cores

“…According to authors of [13][14] oil and gas companies operating carbonate oil and gas condensate fields in Kazakhstan have been carrying out acid stimulation activities leading to a substantial increase in hydrocarbon production. A comprehensive review of historical treatments on several fields located in West-Kazakhstan region was performed to identify areas to improve post-stimulation well performance.…”

Комплексный Подход К Оценке Эффективности Проектируемой Соляно-Кислотной Обработки С Использованием Результатов Лабораторных Исследований И Гидродинамического Моделирования

“…Поэтому при прогнозировании технологического эффекта от рассматриваемого метода по интенсификации добычи углеводородов возникает множество проблем [8], связанных с невозможностью предсказания характера изменения пустотного пространства продуктивного пласта вблизи скважины. В настоящее время ученые стремятся найти способ решения этих проблем, одним из них является проведение фильтрационных исследований на керне при пластовых условиях [9][10][11]. С помощью компьютерной томографии определяется изменение порового пространства, а именно размеры и положение прорвавшегося сквозь образец высокопроводящего канала фильтрации, называемого «червоточиной».…”

Influence of Geological and Technological Parameters on Effectiveness of Hydrochloric Acid Treatment of Carbonate Reservoirs

“…To exercise a competent approach to the design of hydrochloric acid treatment, physical and chemical properties of formation fluids, lithologic and mineralogical composition, type of rock paleolithic facies and pressure-temperature conditions will be taken into account [10]. Furthermore, the success of well stimulation measures is achieved by preliminary evaluation of oil production growth, carried out with the help of hydrodynamic simulators [11,12] and using the results of laboratory studies [13][14][15][16][17][18][19][20][21].…”