Integration of CFD and RTD analysis in flow pattern and mixing behavior of rotary pressure exchanger with extended angle

Abstract

A B S T R A C TIn this study, the computational fluid dynamics (CFD) approach combined with the residence time distribution (RTD) analysis was implemented to examine the mixing performance and flow pattern of rotary pressure exchanger (RPE). Based on oscillatory Reynolds number, a flow regime classification was established for RPE. A concept of extended angle of RPE was proposed, and then, its effects on mixing behavior were evaluated by CFD simulation in laminar model. Meanwhile, flow pattern in RPE was quantified by RTD study, and was well captured in the flow field analysis. In addition, the effects of operating conditions on the mixing and flow pattern were discussed. According to the results, it was shown that the extended angle of RPE is beneficial for mixing control, and a minimum volumetric mixing rate was achieved when the extended angle is ±30˚compared with other configurations. In different operating conditions, the mixing rate was minimized at an oscillatory Reynolds number of about 178. Moreover, the smaller RTD variance, the closer was the flow pattern to an ideal plug flow, leading to a lower volumetric mixing rate of RPE. This study indicates that the RTD and CFD simulation are capable for mixing study and flow analysis in RPE device, and they are complementary and verifiable with each other.

Investigation of the Mixing Rate and Channel Volume Efficiency of a Self-Driven Rotary Energy Recovery Device in the Reverse Osmosis System

“…The change in the inclination angle or extended angle results in a change in the rotary speed at the same flow rate; thus, ξ and the mixing rate vary. To decrease the mixing rate of an RERD, the rotary speed needs to be increased at the same flow rate, implying that self-driven hydraulic efficiency should be improved.…”

“…Mei et al 16 proposed a method to predict how long it took for the mixing zone to propagate to the ends of the channel. Cao et al 17 proposed an extended angle concept for the RERD and investigated its influence on the mixing rate via CFD simulation. They found that at an extended angle of ±30°, the minimum mixing rate was achieved.…”

Assessment of flow pattern and temperature profiles by residence time distribution in typical structured packed beds

“…Here, VRTD is used to assess the degree of flow non-uniformity and how far the flow deviates from the ideal plug flow. The smaller the VRTD, the closer is the flow pattern to an ideal plug flow [33]. In this article, a series of cross sections along the axial direction were created and the tracer concentrations versus the time were monitored.…”

PV‐betriebene Umkehrosmoseanlage zur Meerwasserentsalzung – Modellierung und Analyse verschiedener Energieversorgungsvarianten

“…Die Auslegungsparameter dieser Energierückgewinnung folgen aus denen der RO‐Anlage. Dabei können beim Druckaustausch zwischen dem Konzentrat‐ und dem RO‐Feedstrom, der durch den Druckaustauscher geleitet wird, sehr niedrige Vermischungen auftreten , ; dies wird hier aber nicht unterstellt.…”