Integrated waste management in batch chemical industry based on multi-objective optimization

Abstract

A multi-objective optimization methodology for hazardous liquid waste management is presented in this paper using industrially based LCA models and operating constraints. This approach is used to optimize the handling of waste streams introducing flexible mixing policy scenarios compared to the rigid policy scenarios of the industrial system. It is shown that increasing the degrees of freedom for the waste mixing reduces significantly both the operating cost and the environmental impact by avoiding the use of utilities. Moreover, the influence of waste availability as function of production planning without waste storage is analyzed in several multiperiod optimizations. There, it is demonstrated that this saving potential can be further increased by integration of multiperiod production planning with waste management policies, up to the level of 40% for the environmental impact, and more than 50% for the operating cost, compared to the industrial base case. In some specific cases, a proper matching of production planning and waste mixing policies can also turn the waste treatment into a source of profit exploiting energy production from the incineration process.Implications: This study reveals the savings potential of more flexible policies in waste management, in particular waste mixing of liquid waste in batch chemical industries treated in incineration, wet air oxidation, wastewater treatment plants, or recovered by distillation. Through a multi-objective optimization framework including models for operating costs and life-cycle inventories based on industrial data, operating constraints from industrial practice, and terminal constraints from legislation, savings potentials up to 50% for the operation cost and 40% for the environmental impact are demonstrated in two case studies.

Sustainability assessment of glucose production technologies from highly recalcitrant softwood including scavengers

“…For the sake of clarity, intermediate storage tanks and some heat exchangers are not presented in the flowsheets. In all cases, the process water streams are treated in a conventional industrial waste‐water treatment plant (WWTP) and the lignin is burned in an industrial incineration plant (INC) …”

Reverse logistics research of municipal hazardous waste: a literature review

“…Alidi ( 1992 , 1996 ) developed an integer goal programming model and a multi-objective optimization model that considers the multiple goals and needs of many groups involved in managing and planning hazardous waste systems and offers policy-makers relevant decisions. Later, in order to evaluate the hazardous waste management system and analyse the existing problems and challenges preferably, the scholars have proposed some decision methods, and established relevant models to optimize management system(Asari & Sakai, 2011 ; Court et al, 2015 ; Gu et al, 2014 ; Gumus, 2009 ; Hernandez & Uddameri, 2008 ; Hollister, 2002 ; Mmereki et al, 2014 ; Nema & Gupta, 2003 ; Onan et al, 2015 ; Rerat et al, 2013 ). And there are some scholars to optimize the management system based on technologies such as RFID and GIS (Lu et al, 2012 ).…”

Environmental and economic assessment of lactic acid production from glycerol using cascade bio- and chemocatalysis

“…The process waste streams are treated in conventional industrial waste water treatment plants or incineration units depending on their composition. [20] The basic features and respective flowsheets of each process model are described in the following sections whereas detailed information Biocatalytic DHA production from crude GLY destined for the incineration plant a DHA-2…”

“…The process waste streams were treated in conventional industrial wastewater treatment plants or incineration units depending on their composition. 20 The basic features and respective owsheets of each process model are described in the following sections, whereas detailed information about the process conditions, amount of raw materials and of chemical auxiliaries, reaction conversions, production yields and separation procedures is available in the ESI. † Conventional LA production.…”

“…Background data for the environmental (without renewable resources) and economic assessment with respect to resources consumption (Source: Ecoinvent database, www.alibaba.com and refs [17,18][18]…”