Integrated Model Framework in a Giant Gas Condensate Field for Well Performance Evaluation, Monitoring, Performance Tracking and Remedial Action

Abstract

This paper demonstrates the use of an integrated production optimization platform to determine the well performance for gas condensate wells in a statistical approach to increase the data accuracy for reservoir studies, simulate the field limitations, and provide recommendations for production optimization in a multilayered large carbonate reservoir field. This case involves wells under recycle and natural decline with challenges in the evaluation of well performance where the bulk of the information is available in multiple data sources The first elemental block in establishing the well performance of a gas condensate well is to determine and simulate its fluid behavior. Based on the PVT reports and subsurface fluid studies, compositional PVT models are built and matched with experimental data analyzing representative phase envelop properties and relevant Equation of State (EOS). The next step incorporates the utilization of representative physics-based well models in an integrated system to determine the reservoir and well deliverability. Finally, by applying a detailed statistical approach to the production well test history, models are calibrated in order to predict the performance of the gas condensate wells. Tuning of compositional PVT models established the EOS to be incorporated in predicting the fluid behavior and integrating representative PVT models with well models to determine such behavior along the fluid path. Using the statistical approach, the poor well measurements were identified, facilitating the well-performance and deliverability calculation. In addition, the use of representative models helped in increasing the accuracy of identifying well performance. During this study, two different methodologies were identified based on the reservoir management guidelines. Firstly, for the recycle reservoir in which, the decline of reservoir pressure is arrested using gas Injection. Secondly, for the depletion reservoir, in which the reservoir pressure declines rapidly. For the recycle reservoir, it was statistically identified that the reservoir pressure was declining at less than 4%. Therefore, the acceptance criteria for the operating envelope for each well was defined using the reservoir decline of less than 4%. Similarly, for the depletion reservoir, the pressure was declining between 7% and 10%. Thus, the operating envelope's acceptance criteria were defined using the max reservoir decline tolerance of 10%. The above-identified criteria were incorporated into the integrated model framework to validate the well performance generated from the well tests. Implementing this specialized engineering approach in an integrated model framework considerably reduces the time required by engineers to validate the production well tests and provides higher levels of accuracy for production optimization, voidage replacement ratio calculation, daily rate estimation, and surveillance.