Insulator Leakage Current Prediction Using Hybrid of Particle Swarm Optimization and Gene Algorithm-Based Neural Network and Surface Spark Discharge Data

Abstract

This study proposes a new superior hybrid algorithm, which is the particle swarm optimization (PSO) and gene algorithm (GA)-based neural network to predict the leakage current of insulators. The developed algorithm was utilized for the online monitoring systems, which were completely installed on the 69 kV and 161 kV transmission towers in Taiwan. This hybrid algorithm utilizes the local meteorological data as input parameters combined with the extracted enhanced data: the percentage of spark discharge areas and the brightness change in the image of the discharge phenomenon. These data with a high correlation with the leakage current are utilized as input vectors to improve the accuracy and effectiveness of the developed hybrid model. The performance of the developed algorithm is compared with a traditional PSO-based neural network and backpropagation neural network (BPNN) to evaluate and analyze. The comparative simulation results prove the effectiveness of the combination of hybrid PSO-GA-based neural network and surface discharge data, which achieved a maximum improvement of 38.54% MSE, 10.62% MAPE, and 3.41% R square for 161 kV data and 39.28% MSE, 12.62% MAPE, and 1.61% R square for 69 kV data. Moreover, the data with enhanced inputs outperform the traditional data in most benchmark factors, improving the accuracy and effectiveness in defining the deteriorative insulators. The developed methodology with a noticeable improvement was utilized in the online monitoring system to reduce the operational and maintenance cost of transmission lines in Taiwan Power Company.

Influence of Mounting Incline and Natural Environmental Factors on Pin-Type Silicone Rubber Insulator Leakage Currents Using Internet-Based Monitoring

“…This case indicated that in addition to being caused by wetting intensity, the increasing rates were influenced positively by applied voltages. The rising insulator leakage currents due to rainfall were also implied in [42], [43], [44], and [45] as a low correlation of 0.31 [46] and reciprocal to the applied voltage [47].…”