ResumoOs aços carbono são materiais metálicos muito importantes na fabricação de peças para a indústria metal-mecânica. Parafusos, hastes, eixos, pistões, engrenagens são fabricados a partir desse tipo de aço, mais especificamente do aço SAE1040. O objetivo desse trabalho foi de avaliar a influência da presença de 0,2% em massa de cromo nas propriedades mecânicas e metalúrgicas de um aço com 0,4% em massa de carbono. A liga padrão SAE1040 e esta liga modificada com cromo foram submetidas a tratamentos térmicos de normalização, recozimento, têmpera e revenimento, e comparadas às durezas e microdurezas das diferentes amostras entre si. Os resultados obtidos evidenciaram que a adição de cromo é um método eficiente quando se deseja aumentar a resistência de um material. Observou-se que os valores de dureza e microdureza para o aço com a adição de cromo apresentaram-se maiores em relação ao aço padrão, como consequência das microestruturas obtidas, principalmente após têmpera e revenimento. A adição de 0,2% em massa de cromo no aço carbono influiu na melhora das propriedades mecânicas do aço tornando-o mais interessante na fabricação de peças para a indústria metal-mecânica. Palavras-chave: Cromo; Tratamento térmico; SAE1040; Ensaios mecânicos; Aço.
INFLUENCE OF CHROMIUM MECHANICAL AND METALLURGICAL PROPERTIES OF STEEL SAE 1040 AbstractCarbon steels are very important materials in parts production to the metal-mechanical industry. Screws, rods, shafts, pistons, gears are manufactured to this kind of steel, more specifically SAE1040 steel. The objective of this study was to evaluate the influence of the presence of 0.2wt% of chromium in the mechanical and metallurgical properties of steel with 0.4wt% carbon. The standard alloy SAE1040 and this alloy modified by chromium were submitted to heat treatment of normalization, annealing, quenching and tempering, and was compared to the hardness and microhardness of different samples to each other. The results showed that the addition of chromium is an efficient method when you want to increase the resistance a material. It was observed that the values for hardness and microhardness for the steel with the addition of chromium were bigger in relation to standard steel, it because of the microstructures obtained after quenching and tempering. The addition of 0.2wt% of chromium in carbon steel influenced the improvement of mechanical properties of steel, making it more interesting for the manufacture of parts for the metalworking industry.