Influences of the vibration frequency and phase of the core of ultra-high voltage shunt reactors on suspended discharge in oil-paper insulation

Abstract

Severe vibration of the core of ultra-high voltage (UHV) shunt reactors under operating conditions often leads to the occurrence of suspension electrode, and such a suspended discharge defect will destroy the oil-paper insulation. It is necessary to investigate the influence of vibration on suspended discharge when determining the best operating condition of UHV shunt reactors. The vibration frequency of the suspension electrode and the phase difference between the applied voltage and the vibration are studied by simulation and experiment. The simulation results show that the phase difference between the voltage and the vibration parameters will lead to an increase in the surface maximum field strength. The distortion of the field intensity caused by several typical vibration frequencies of reactor vibration is ranked (in ascending order) thus: 100, 300, 50, and 200 Hz. There is a coupling relationship between the phase difference and the vibration frequency on the suspended discharge, which will lead to an inconsistency between the field intensity and each single factor. The partial discharge test results of the collision between the suspension electrode and the high-voltage electrode show that the discharge generated by vibration at 100 Hz is much higher than that at other frequencies, followed by those at 300 and 50 Hz, and the discharge generated by vibration at 200 Hz is very small. When the phase difference of voltage advance vibration is between 0° and 90°, the quantity of local discharge is large. When the phase difference is between 90° and 180°, the local discharge is small.