Influence of the ultrasonic vibration amplitude on the melt pool dynamics and the weld shape of laser beam welded EN AW-6082 utilizing a new excitation system for laser beam welding

Abstract

Laser beam welding is a commonly used technology for joining similar and dissimilar materials. In order to improve the mechanical properties of the weld, the introduction of ultrasonic vibration into the weld zone has been proposed [5]. The ultrasonic system consists of an electronic control, a power supply, a piezoelectric converter and a sonotrode, which introduces the vibration into the weld zone. Its proper design is of great importance for the process performance. Furthermore, the effects of ultrasound in a melt pool need to be understood to evaluate and optimize the process parameters. In addition, it is important to find out the limits of ultrasonic excitation with respect to a maximum vibration amplitude. Therefore, firstly different methods of ultrasonic excitation are investigated and compared with respect to their performance. A system which is based on using longitudinal vibrations turns out to be the best alternative. Secondly, the system design is described in detail to understand the boundary conditions of the excitation and finally, simulations about the influence of ultrasonic vibrations are done by using a simplified model. The system is used to perform experiments, which aim at detecting the maximum vibration amplitude doing bead on plate welds of EN AW-6082 aluminum alloy. The experiments reveal a significant change of the weld shape with increasing ultrasonic amplitude, which matches the simulative findings. If the amplitudes are small, there is a marginal effect on the weld shape. If the amplitudes are high, melt is ejected and the weld shape is disturbed. In the present case, amplitudes over 4 µm were found to disturb the weld shape.

Investigations on the Specifics of Laser Power Modulation in Laser Beam Welding of Round Bars

“…1. The complete setup is described in detail in [21]. Round bars with a diameter of 30 mm are used as specimens.…”

Vibration-Assisted Welding of 42CrMo4 Steel: Optimizing Parameters for Improved Properties and Weldability

“…Mechanical oscillations can also be induced locally in the molten metal area through various methods, such as the Cold Metal Transfer (CMT) welding process [ 22 ], high-frequency oscillations with piezoelectric transducers, voltage pulses over DC welding current, and vibration of filler rods in TIG or wires in MIG/MAG welding [ 23 , 24 , 25 , 26 , 27 ]. While these techniques minimally impact the base metal, they significantly improve the weld bead’s microstructure and mechanical characteristics.…”

Dynamic Characteristics of Plasma in Ultrasonic-Assisted Narrow-Gap Laser Welding with Filler Wire

“…At present, the addition of ultrasonic-assisted welding has become a vital regulation method. Due to the high quality of welding and fewer pores, an increasing number of researchers have introduced ultrasound into laser welding [ 16 , 17 , 18 , 19 , 20 , 21 , 22 ].…”