Influence of surface structure of SiC nano-sized powder analyzed by X-ray photoelectron spectroscopy on basic powder characteristics

Effect of carbon nanofibers (CNFs) content on thermal and mechanical properties of CNFs/SiC nanocomposites

“…1a and b, respectively. The characterizations of SiC nano-powder employed in this study were described elsewhere [23]. They were mixed in isopropyl alcohol (IPA) using ball milling for 5 h to form SiC ''nano powder slurry" with …”

Microwave absorption properties of SiC@SiO2@Fe3O4 hybrids in the 2–18 GHz range

“…The peak at 284.5 eV is attributed to C 1s. The peaks at 151.7 and 100.8 eV are assigned to Si 2s and Si 2p of SiC@SiO 2 [33]. Moreover, the intensities of the peaks of C and Si decrease substantially with increasing amount of Fe 3 O 4 , which is attributable to the fact that SiC@SiO 2 was almost fully covered by Fe 3 O 4 nanoparticles.…”

Thermal stress relaxation creep and microstructural evolutions of nanostructured SiC ceramics by liquid phase sintering

“…Characterizations of the starting nanopowder employed in this study were previously reported in detail. 17 The formation temperature of a transient eutectic phase between Al 2 O 3 and Y 2 O 3 can be lowered by including a small amount of SiO 2 , which leads to the attractive promotion of densification of SiC nano-powder below 1900 • C. 18 Polycrystalline chemically vapor-deposited SiC (CVD-SiC) ceramics (Roman and Haas Co., Waborn, MA, USA) were used for the examination of high-purity SiC with clean grain boundaries.…”