Influence of salt, pH and polyelectrolyte on the pressure electro-dewatering of sewage sludge

Citeau, Morgane; Larue, O.; Vorobiev, Eugène

doi:10.1016/j.watres.2011.01.001

Cited by 132 publications

(57 citation statements)

References 36 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Our study seems to confirm that polyelectrolyte addition does not always exert a positive effect during EDW [36]. The effect of polyelectrolyte is more pronounced for the stage where the dewatering relies on filtration, i.e.…”

Section: Results Of Edw Tests On Ds Contentsupporting

confidence: 77%

See 1 more Smart Citation

Assessment of pressure-driven electro-dewatering as a single-stage treatment for stabilized sewage sludge

Visigalli

Turolla

Hai

et al. 2017

Journal of Environmental Chemical Engineering

View full text Add to dashboard Cite

Section: Results Of Edw Tests On Ds Contentsupporting

confidence: 77%

“…Indeed, aerobically stabilised sludge can hardly exceed 25-30% (wt%) DS content, even when dewatered with filter presses which usually operate at higher pressure and produce drier sludge [33]. Moreover, the polyelectrolyte addition does not affect the dewaterability under the EDW and it suggests that the chemical input can be reduced [36].…”

Section: Tablementioning

confidence: 99%

Assessment of pressure-driven electro-dewatering as a single-stage treatment for stabilized sewage sludge

Visigalli

Turolla

Hai

et al. 2017

Journal of Environmental Chemical Engineering

View full text Add to dashboard Cite

“…Citeau et al (2011) also studied the influence of polyelectrolyte type and dosing on EDW efficiency. However, so far the high variability of sludge samples produced by different WWTPs (in terms of DS, VS/DS, conductivity) prevented from building a general model capable of predicting EDW efficiency for all the sludge types.…”

Section: Introductionmentioning

confidence: 99%

Performance of electro-osmotic dewatering on different types of sewage sludge

Visigalli

Turolla

Gronchi

et al. 2017

Environmental Research

View full text Add to dashboard Cite

A B S T R A C TThe feasibility of pressure-driven electro-dewatering (EDW) on sludge samples taken after different biological processes, stabilisation methods or mechanical dewatering techniques was assessed. First, the influence of potential values on EDW of anaerobically and aerobically stabilised, mechanically dewatered, sludge samples was investigated. Preliminary tests carried out by applying a constant potential (10, 15 and 20 V) in a lab-scale device confirmed the possibility to reach a dry solid (DS) content of up to 42.9%, which corresponds to an increase of 15% of the dry content in dewatered sludge without the application of the electrical field. Dewatering increased with the applied potential but at the expense of a higher energy consumption. A potential equal to 15 V was chosen as the best compromise for EDW performance, in terms of DS content and energy consumption. Then, the influence of the mechanical dewatering was studied on aerobically stabilised sludge samples with a lower initial DS content: the higher initial water content led to a lower final DS content but with a considerable reduction of energy consumption. Finally, the biological process, studied by comparing sludge samples from conventional activated sludge and membrane bioreactor processes, didn't evidence any influence on EDW. Experimental results shown that DS obtained after mechanical dewatering, volatile solids and conductivity are the main factors influencing EDW. Anaerobically digested sludge reached the highest DS content, thanks to lower organic fraction.

show abstract

Section: Introductionmentioning

confidence: 99%

“…However, the high DS values demanded for thermal valorisation of sludge cannot be achieved by mechanical dewatering techniques. , and Tuan et al [10] reported that the pH drop relates to the reduction of the absolute value of the zeta potential, thus the decrease in pH (specifically at the anode) reduced the electro-osmotic flow during direct current application [1, 5,8,11].The oxidation of the anode material, due to oxygen evolution, ohmic heating and pH decrease, reduces the process efficiency [12] and can cause in some applications the contamination of the filter cake or filtrate, increasing the operating cost. Anodes such as stainless steel will be subject to…”

mentioning

confidence: 99%

Electrode surface treatments in sludge electro-osmosis dewatering

Gronchi

Canziani

Brenna

et al. 2017

Materials and Manufacturing Processes

View full text Add to dashboard Cite

The sewage sludge dewatering produced by Wastewater Treatment Plants is a multifaceted process due to the presence of colloid fractions. Electro-osmosis could be a suitable technique to reduce the water content of the final sludge. Electric fields of 10 V/cm, 15 V/cm and 20 V/cm have been studied for electro-osmosis tests under the pressure of a static or rotating piston, obtaining a dry solids content up to 40-45%, with respect to 25-30% obtained by mechanical methods. In order to optimise the process, the corrosion behaviour and the wear of the anodic material appear the main critical aspects, due to the high circulating current density and the use of a rotating electrode. We compared the efficiency and the corrosion resistance of dimensionally stable anodes (DSA) with respect to bare stainless steel (AISI 304) and stainless steel coated by PVD technique with TiN, AlTiN and DLC. Characterization of the anode surfaces by SEM and potentiodynamic tests, show that DSA is the most suitable material for our application. However, efficiencies of the electro-osmosis processes have been found comparable, in terms of developed current densities and total energy consumptions, for short-test duration.Keywords: electro-osmosis; dewatering; sludge; DSA; anode; corrosion. IntroductionThe so-called "activated sludge process" is adopted by almost the totality of urban and industrial wastewater treatment plants to achieve the concentration limits of biodegradable pollutants stated by the law to allow the discharge of treated effluents to natural water bodies (rivers, lakes and the sea).About half of the organic pollution load treated by the activated sludge process is oxidised and converted into water and carbon dioxide, while the remaining is converted into biomass, called "excess biological sludge" or "waste sludge". After reducing both the content of biodegradable matter and the water content through mechanical dewatering or thermal drying, the sludge becomes a product suitable for its final disposal.When compared with thermal (evaporative) processes for water reduction, mechanical dewatering is often selected due to its low energy requirement. The processes of mechanical dewatering are largely developed on the industrial scale and can produce sludge with 20-25% of dry solid (DS) content and, in some cases, up to 30%. However, the high DS values demanded for thermal valorisation of sludge cannot be achieved by mechanical dewatering techniques. , and Tuan et al. [10] reported that the pH drop relates to the reduction of the absolute value of the zeta potential, thus the decrease in pH (specifically at the anode) reduced the electro-osmotic flow during direct current application [1, 5,8,11].The oxidation of the anode material, due to oxygen evolution, ohmic heating and pH decrease, reduces the process efficiency [12] and can cause in some applications the contamination of the filter cake or filtrate, increasing the operating cost. Anodes such as stainless steel will be subject to

show abstract

Influence of salt, pH and polyelectrolyte on the pressure electro-dewatering of sewage sludge

Cited by 132 publications

References 36 publications

Assessment of pressure-driven electro-dewatering as a single-stage treatment for stabilized sewage sludge

Assessment of pressure-driven electro-dewatering as a single-stage treatment for stabilized sewage sludge

Performance of electro-osmotic dewatering on different types of sewage sludge

Electrode surface treatments in sludge electro-osmosis dewatering

Contact Info

Product

Resources

About