Search citation statements
Paper Sections
Citation Types
Year Published
Publication Types
Relationship
Authors
Journals
This study investigates the microstructural behavior of laboratory-produced Al–Mg–Si(X)–Mn aluminum alloys, focusing on the influence of varying Si content during biaxial hot tensile testing. Alloys with Si contents of 0.7%, 0.9%, and 1.3% were subjected to biaxial deformation at temperatures of 200 °C, 300 °C, and 400 °C. Using digital image correlation analysis, the impact of Si content on microstructural evolution under biaxial tensile loading was analyzed. Force–displacement analysis revealed a consistent inverse relationship between temperature and the maximum force required to initiate strain. At the temperature of 200 °C, the Al–Mg–Si(1.3)–Mn alloy required a maximum force of 1500 N, while at the temperature of 400 °C this force decreased to 900 N. The degree of anisotropy varied, with higher Si alloys exhibiting increased resistance to deformation in the transverse direction. In particular, the Al–Mg–Si(1.3)–Mn alloy showed pronounced strain anisotropy, with large major true strain φ1 values reaching up to 0.32 at 400 °C, compared to 0.26 at 300 °C and 0.2 at 200 °C. Microstructural analysis using electron backscatter diffraction (EBSD) and energy dispersive X-ray spectrometry (EDS) showed minimal changes at low temperatures, while increased dislocation density and grain boundary distortion were observed at elevated temperatures. The β-Mg2Si precipitates, influenced by Si content and temperature, significantly affected the mechanical properties. In the Al–Mg–Si(0.7)–Mn alloy, precipitates were predominantly 1–3 µm in diameter, whereas in the Al–Mg–Si(1.3)–Mn alloy, precipitates grew to 4–8 µm at higher Si content. These findings provide critical insights into the mechanical response and deformation mechanisms of aluminum alloys under biaxial tensile conditions, essential for optimizing material performance in engineering applications. Graphical abstract
This study investigates the microstructural behavior of laboratory-produced Al–Mg–Si(X)–Mn aluminum alloys, focusing on the influence of varying Si content during biaxial hot tensile testing. Alloys with Si contents of 0.7%, 0.9%, and 1.3% were subjected to biaxial deformation at temperatures of 200 °C, 300 °C, and 400 °C. Using digital image correlation analysis, the impact of Si content on microstructural evolution under biaxial tensile loading was analyzed. Force–displacement analysis revealed a consistent inverse relationship between temperature and the maximum force required to initiate strain. At the temperature of 200 °C, the Al–Mg–Si(1.3)–Mn alloy required a maximum force of 1500 N, while at the temperature of 400 °C this force decreased to 900 N. The degree of anisotropy varied, with higher Si alloys exhibiting increased resistance to deformation in the transverse direction. In particular, the Al–Mg–Si(1.3)–Mn alloy showed pronounced strain anisotropy, with large major true strain φ1 values reaching up to 0.32 at 400 °C, compared to 0.26 at 300 °C and 0.2 at 200 °C. Microstructural analysis using electron backscatter diffraction (EBSD) and energy dispersive X-ray spectrometry (EDS) showed minimal changes at low temperatures, while increased dislocation density and grain boundary distortion were observed at elevated temperatures. The β-Mg2Si precipitates, influenced by Si content and temperature, significantly affected the mechanical properties. In the Al–Mg–Si(0.7)–Mn alloy, precipitates were predominantly 1–3 µm in diameter, whereas in the Al–Mg–Si(1.3)–Mn alloy, precipitates grew to 4–8 µm at higher Si content. These findings provide critical insights into the mechanical response and deformation mechanisms of aluminum alloys under biaxial tensile conditions, essential for optimizing material performance in engineering applications. Graphical abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.