Influence of microstructure of composite amorphous/nanocrystalline Fe72Ni8Si10B10 alloy on the corrosion behavior in various environments

Vasić, Milica; Šimatović, Ivana Stojković; Radović, Ljubica; Minić, Duško

doi:10.1016/j.corsci.2022.110403

Cited by 3 publications

(2 citation statements)

References 66 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…These result show that the addition of Cr element can firstly reduce stress cracking and pitting by cor rosion and then increase them, show a maximal pitting resistance at cCr = 7 at.%. S1 [42][43][44][45][46][47][48][49][50][51][52][53].…”

Section: Ribbonmentioning

confidence: 99%

See 1 more Smart Citation

Role of Cr Element in Highly Dense Passivation of Fe-Based Amorphous Alloy

Song,

Wang,

Chen

et al. 2023

Materials

View full text Add to dashboard Cite

The effect of the Cr element on the corrosion behavior of as-spun Fe72−xCrxB19.2Si4.8Nb4 ribbons with x = 0, 7.2, 21.6, and 36 in 3.5% NaCl solution were investigated in this work. The results show that the glass formability of the alloys can be increased as Cr content (cCr) is added up to 21.6 at.%. When cCr reaches 36 at.%, some nanocrystals appear in the as-spun ribbon. With increasing cCr content, the corrosion resistances of as-spun Fe-based ribbons are continually improved as well as their hardness properties; during the polarization test, their passive film shows an increase first and then a decrease, with the highest pitting potential as cCr = 7.2 at.%, which is confirmed by an XPS test. The dense passivation film, composed of Cr2O3 and [CrOx(OH)3−2x, nH2O], can reduce the number of corrosion pits on the sample surface due to chloride corrosion and possibly be deteriorated by the overdosed CrFeB phase. This work can help us to design and prepare the highly corrosion-resistant Fe-based alloys.

show abstract

Section: Ribbonmentioning

confidence: 99%

“…Figure 7. The comparison diagram of corrosion potential (E corr ) and corrosion current density (i corr ) of various Fe-based alloys in 3.5 wt.% NaCl solution; details are listed in TableS1[42][43][44][45][46][47][48][49][50][51][52][53].…”

mentioning

confidence: 99%