Influence of Isothermal Aging on Microstructure and Shear Property of Novel Epoxy Composite SAC305 Solder Joints

Abstract

With the rapid iteration of microsystem integrated technology, the miniaturization of electronic devices requires packaging materials with higher reliability. In this work, the microstructure evolution and mechanical properties of novel epoxy composite SAC305 solder joints were studied after isothermal aging to evaluate the enhanced effect of epoxy addition. The thickness variation and morphological evolution of the interfacial layer were analyzed. The results showed that, as the aging time was prolonged, the Cu6Sn5 interfacial layer remarkably coarsened and Cu3Sn compounds formed between the Cu6Sn5 layer and Cu pad due to the continuous atomic diffusion. Compared with the monolithic joint, the epoxy composite SAC305 joints had a lower overall IMC growth rate during aging, closely related to the initial morphologies of the interfacial layers. The shear test results showed an apparent decrease in the shear forces of all the solder joints as the aging time increased. Nevertheless, because of the extra mechanical support provided by the epoxy layer, the epoxy composite joints demonstrated notably enhanced mechanical properties. After 1000 h aging treatment, the shear force of SAC305 joints containing 8 wt.% epoxy was 26.28 N, showing a 24.08% increase over the monolithic joint. Cu-Sn IMCs were detected on the shear fracture of the monolithic joint after 1000 h aging, indicating the fracture occurred near the interface and displayed a ductile/brittle mixed fracture. Concerning the epoxy composite joints, cracks were still initiated and extended within the solder bulk, demonstrating a noticeable enhancement in ductility due to the addition of epoxy.

Interfacial reaction of Sn-1.5Ag-2.0Zn low-silver lead-free solder with oriented copper

“…The intermetallic compounds (IMCs) Ag 3 Sn and Cu 6 Sn 5 at the solder joints are in coarse slats after aging of the solder. They are brittle and affect reliability [ [21] , [22] , [23] , [24] , [25] , [26] ]. Low silver content solder can reduce the cost of solder.…”

Investigating the impact of different solder alloy materials during laser soldering process

“…Numerous research papers have explored methods and parameters to enhance the quality and reliability of solder joints in reflow processes (Bachok et al, 2018;Che Ani et al, 2018a, 2018b, 2019Mohamed Muzni et al, 2023;Zhang et al, 2023). However, a noticeable gap exists in the optimization of laser soldering parameters.…”