Influence of flooding on GPS carrier-to-noise ratio and water content variation analysis: a case study in Zhengzhou, China

Self Cite

The CNR (Carrier-to-Noise Ratio) of GPS (Global Positioning System) satellites is highly relevant to the multipath error. The multipath error is more serious in the flood environment since the reflection and diffraction coefficients of water are much higher compared to dry soil. Thus, the amplitude of CNR will decrease in the flood environment. In this study, the relationship between multipath error, flooding, and CNR is introduced in theory. Then, by using the characteristic of the orbital repetition period, the stability of CNR between 2 adjacent days in a static observation environment is demonstrated by 32 MGEX (Multi-GNSS Experiment) stations in different latitude and longitude regions of the world. The results show that the average RMS of different CNRs between two adjacent days is only about 0.62 dB-Hz. In addition, the correlation coefficient of CNRs between two adjacent days is analyzed. The correlation coefficient of the original signal CNR is 0.997. Moreover, after mitigating the influence of random noise and lower CNR, the correlation coefficients of the fitted CNRs larger than 40 dB-Hz can reach 0.999. Thus, based on the fluctuation in original CNR, fitted CNR, and seamless series characteristics of CNR, the whole flood process from occurrence to recession can be retrieved. A flood that occurred in Zhengzhou City, China, from DOY 200 to DOY 202, 2021 is used to demonstrate the process of retrieval. The experimental results indicate that the flood appeared at about 15:30 pm on DOY 200, reached a peak at approximately 8:30 am on DOY 202, and totally subsided at about 10:00 am on DOY 202. In conclusion, the CNR can be effectively used to retrieve the whole process of the flood, which lays a foundation for researching flood detection and warning based on GPS satellites.

Section: Influence Analysis Of Flooding On Cnrmentioning

confidence: 82%

“…The sample interval was 30 s. The elevation cut-off angle was 5 deg. Concrete information about the flood is available in Su et al [20].…”

Section: Influence Analysis Of Flooding On Cnrmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Accurate Retrieval of the Whole Flood Process from Occurrence to Recession Based on GPS Original CNR, Fitted CNR, and Seamless CNR Series

Tong

Zheng

et al. 2023

Self Cite

“…With the constant development of the Global Navigation Satellite System (GNSS), the use of GNSS multipath signals for the remote sensing of geophysical parameters has increased [12,13]. It has the advantages of multiple signal sources, wide coverage, and high efficiency, and has been widely used for monitoring SM [14][15][16][17], sea level or tides [18,19], snow depth or reflector height [20][21][22], Flood [23], and vegetation changes [24,25].…”

Section: Introductionmentioning

confidence: 99%

Soil Moisture Retrieval Using GNSS-IR Based on Empirical Modal Decomposition and Cross-Correlation Satellite Selection

Ding

Liang

et al. 2023

Global Navigation Satellite System interferometric reflectometry (GNSS-IR), as a new remote sensing detection technology, can retrieve surface soil moisture (SM) by separating the modulation terms from the effective signal-to-noise ratio (SNR) data. However, traditional low-order polynomials are prone to over-fitting when separating modulation terms. Moreover, the existing research mainly relies on prior information to select satellites for SM retrieval. Accordingly, this study proposes a method based on empirical modal decomposition (EMD) and cross-correlation satellite selection (CCSS) for SM retrieval. This method intended to adaptively separate the modulation terms of SNR through the combination of EMD and an intrinsic mode functions (IMF) discriminant method, then construct a CCSS method to select available satellites, and finally establish a multisatellite robust estimation regression (MRER) model to retrieve SM. The results indicated that with EMD, the different feature components implied in the SNR data of different satellites could be adaptively decomposed, and the trend and modulation terms of the SNR could more accurately be acquired by the IMF discriminant method. The available satellites could be efficiently selected through CCSS, and the SNR quality of different satellites could also be classified at different accuracy levels. Furthermore, MRER could fuse the multisatellite phases well, which enhanced the accuracy of SM retrieval and further verified the feasibility and effectiveness of combining EMD and CCSS. When rm=0.600 and rn=0.700, the correlation coefficient (r) of the multisatellite combination reached 0.918, an improvement of at least 40% relative to the correlation coefficient of a single satellite. Therefore, this method can improve the adaptive ability of SNR decomposition, and the selection of satellites has high flexibility, which is helpful for the application and popularization of the GNSS-IR technology.

“…As an essential technology, the Global Navigation Satellite System (GNSS) has been utilized in various fields, including aviation [1], geodesy [2] and earthquake detection [3] and climate monitoring [4]. However, in complex environments like urban canyons, GNSS stations face challenges due to the reflection, diffraction and obstruction of signals by local obstacles around the antenna [5].…”

Section: Introductionmentioning

confidence: 99%

Characterization of BDS Multipath Effect Based on AT-Conv-LSTM Network

Sun,

Tang,

Zhou

et al. 2023

Multipath effects are the most challenging error sources for the Global Navigation Satellite System receiver, affecting observation quality and positioning accuracy. Due to the non-linear and time-varying nature, multipath error is difficult to process. Previous studies used a homogeneous indicator to characterize multipath effects and only revealed the temporal or spatial correlations of the multipath, resulting in limited correction performance. In this study, we consider the code multipath to be influenced not only by the elevation and azimuth angle of certain stations to satellites but also to be related to satellite characteristics such as nadir angle. Hence, azimuth angle, elevation angle, nadir angle and carrier-to-noise power density ratio are taken as multiple indicators to characterize the multipath significantly. Then, we propose an Attention-based Convolutional Long Short-Term Memory (AT-Conv-LSTM) that fully exploits the spatiotemporal correlations of multipath derived from multiple indicators. The main processing procedures using AT-Conv-LSTM are given. Finally, the AT-Conv-LSTM is applied to a station for 16 consecutive days to verify the multipath mitigation effectiveness. Compared with sidereal filtering, multipath hemispherical map (MHM) and trend-surface analysis-based MHM, the experimental results show that using AT-Conv-LSTM can decrease the root mean square error and mean absolute error values of the multipath error more than 60% and 13%, respectively. The proposed method can correct the code multipath to centimeter level, which is one order of magnitude lower than the uncorrected code multipath. Therefore, the proposed AT-Conv-LSTM network could be used as a powerful alternative tool to realize multipath reduction and will be of wide practical value in the fields of standard and high-precision positioning services.