Infinite length slotted ultra-wideband monopole antenna using step-feed with band notch characteristics

Abstract

In this work, a printed ultra-wideband (UWB) antenna has been proposed exhibiting band notch characteristics. The proposed design covers the entire UWB band except for the 3.5 GHz band providing the band notch for the WiMAX band. This design consists of two-quarter elliptical patches placed symmetrically over the FR4 substrate. The elliptical shape of the patch is responsible for the UWB band achieved. The slot has been created on the optimized patch area to achieve the desired characteristics providing a notch for the WiMAX band. The slot in the patch is so perfectly designed that it gives the patch a perfect shape of butterfly wings. After designing, the proposed antenna was simulated and then fabricated. The fabricated and simulated results are in close agreement with each other which shows, the proposed UWB antenna is good enough for biomedical applications.

Three‐dimensional miniaturized super wideband antenna with filtering capabilities

“…Table 3 gives a comparison of the proposed 3D antenna with other relevant super wide band notch antennas in the literature. From the comparative data, the proposed antenna provided better fractional bandwidth (FBW) with small footprint at a relatively high gain compared to the other literature [7][8][9]11,12,15,17,[19][20][21][22][31][32][33][34][35][36][37] , while offering triple notched band characteristics with good notched band response. It is for this reason the proposed antenna is termed as miniature.…”