Incorporating Vibration Test Results for the Advanced Stirling Convertor into the System Dynamic Model

Abstract

have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. As part of the extended operation testing of this power system, the Advanced Stirling Convertors (ASC) at NASA GRC undergo a vibration test sequence intended to simulate the vibration history that an ASC would experience when used in an ASRG for a space mission. During these tests, a data system collects several performance-related parameters from the convertor under test for health monitoring and analysis. Recently, an additional sensor recorded the slip table position during vibration testing to qualification level. The System Dynamic Model (SDM) integrates Stirling cycle thermodynamics, heat flow, mechanical mass, spring, damper systems, and electrical characteristics of the linear alternator and controller. This Paper presents a comparison of the performance of the ASC when exposed to vibration to that predicted by the SDM when exposed to the same vibration.

Dynamic Power Convertor Development for Radioisotope Power Systems at NASA Glenn Research Center

“…This tool accurately models the physics-based dynamics of components of dynamic convertor operation (Ref. 25). It is useful for transient as well as steady-state analysis.…”