Incorporating frictional anisotropy in the design of a robotic snake through the exploitation of scales

Abstract

The scales on the skin of a snake are an integral part of the snake's locomotive capabilities. It stands to reason that the integration of scales into the design of robotic snakes would open new properties to exploit. In this work, we present a robotic snake design that incorporates rigid scales in the casing of each module. To validate the impact of the scales, locomotion is tested under three conditions: with scales, covered in cloth with scales, and covered in cloth without scales. The performance of the snake robot, in each of the aforementioned scenarios, is evaluated based on its forward displacement while executing each of two pre-programmed gaits: inchworm and lateral undulation. The lateral undulation gait is tested under two additional conditions: pitched and un-pitched. Tracks of the experimental runs are presented followed by a statistical analysis demonstrating an increase in locomotive performance when incorporating scales in the chassis design.978-1-4799-6923-4/15/$31.00 ©2015 IEEE

Enhanced Locomotion Efficiency of a Bio-inspired Walking Robot using Contact Surfaces with Frictional Anisotropy

“…This makes our solution simple and cheap. Our approach is also different from other developments which require complex motion control or/and special robot structures (e.g., active scales) to achieve frictional anisotropy for efficient locomotion263738.…”

Design and Control of a Cable-Driven Articulated Modular Snake Robot

“…Marvi et al, studied active control of scales in corn snakes and developed the two-link inchworm robot ScalyBot, to study the effects of actively adjusted scales on locomotion, on flat and inclined planes [24]. Grooves, static scales, and friction skins have also been widely used to incorporate the desired friction characteristics directly into the construction of a snake robot's outer shell, as in the 3D printed scales employed by the Scaled Snake Robot, or the bristle-covered fabric used in the MMIR robot [25], [26].…”

Evaluation of Bio-Inspired Scales on Locomotion Performance of Snake-Like Robots

“…The robotic snake employed in these experiments extends its predecessor. 37 It has 12 serially connected modules, each consisting of a motor, an aluminum link connecting to the next module and a fabricated plastic chassis encasing both. The chassis exterior is lined with artificial scales on all but one side.…”

“…Discrete approximation of the continuous gait shapes was accomplished using a methodology similar to refs. [37,45]. For each body wave component, a forward march from the caudal to rostral ends was performed whereby the tail, each interior joint and the head were sequentially positioned coincident with the planar body wave component.…”