In situ optical coherence tomography of percutaneous implant-tissue interfaces in a murine model

Abstract

Novel surface coatings of percutaneous implants need to be tested in biocompatibility studies. The use of animal models for testing usually involves numerous lethal biopsies for the analysis of the implant-tissue interface. In this study, optical coherence tomo graphy (OCT) was used to monitor the reaction of the skin to a percutaneous implant in an animal model of hairless but immunocompetent mice. In vivo optical biopsies with OCT were taken at days 7 and 21 after implantation and post mortem on the day of noticeable inflammation. A Fourier-domain OCT was programmed for spoke pattern scanning schemes centered at the implant midpoint to reduce motion artifacts during in vivo imaging. Image segmentation allowed the automatic detection and morphometric analysis of the skin contour and the subcutaneous implant anchor. On the basis of the segmentation, the overall refractive index of the tissue within one OCT data set was estimated as a free parameter of a fitting algorithm, which corrects for the curved distortion of the planar implant base in the OCT images. OCT in combination with the spoke scanning scheme and image processing provided time-resolved three-dimensional optical biopsies around the implants to assess tissue morphology.Keywords: in vivo; motion artifacts; refractive index; scanning scheme; segmentation. To the time point of the study, affiliated with Biomedical Optics Department, Laser Zentrum Hannover e.V., D-30419 Hannover, Germany and also with CrossBIT, Hannover Medical School, 30625 Hannover, Germany.

Measurement of Ex Vivo Porcine Lens Shape During Simulated Accommodation, Before and After fs-Laser Treatment

“…To measure the geometry of the crystalline lens, spectraldomain OCT (see Fig. 2), which has been described in detail by Donner et al, 41 was used. In brief, the light of a broadband superluminescent diode (SLD) (Superlum Diodes, Ltd., Carrigtwohill, Ireland) is transmitted through a single mode fiber into a Michelson interferometer with an 80:20 nonpolarizing beam splitter (NPBS).…”

Core–shell bioprinting as a strategy to apply differentiation factors in a spatially defined manner inside osteochondral tissue substitutes

“…This presented a valuable non-destructive option of imaging and material characterization since x-ray-based techniques are not suitable due to the low contrast in hydrogels and aqueous systems. Recently, OCT has gained more and more interest for the field of biomaterials by allowing observation of implants after in situ placement [47], or with additional image processing for automated assessment of the outer geometry and channel networks of bioprinted gelatin/alginate fibers [48] offering the option of a direct feedback during printing [49]. The contrast for cell visualization/tracking, in addition to the applied MTT staining of viable cells, can be enhanced by magnetic labelling of cells prior to application as shown for agar scaffolds [50] or by leveraging the dynamics of living cells.…”