a b s t r a c tA 30 lm thin-film tubular CGO (Ce 0.9 Gd 0.1 O 1.95Àd ) membrane with catalytic layers on both sides has been prepared by dip-coating on a low cost, porous magnesium oxide (MgO) support. The MgO support was fabricated through a thermoplastic extrusion process. Support, thin membrane and catalytic layers were sintered in individual steps at temperatures between 1250 and 1300°C to achieve a controlled removal of binder and organic additives and to obtain the desired, defect free microstructure. The prepared asymmetric tubular CGO membrane has been tested at elevated temperatures (up to 900°C) using atmospheric air and N 2 , H 2 for the feed and sweep side respectively. The oxygen permeation was 4 N ml min À1 cm À2 at 850°C using H 2 on one side and air on the other side.