‪Impulse wave generation: a comparison of landslides of block and granular masses by coupled Lagrangian tracking using VOF over a set mesh

Abstract

This paper presents the numerical results of impulsive waves generated by landslides of solid block, granular materials and heavy block sinking. An impulse product parameter P is developed and a wide range of effective parameters are studied. The volume-of-fluid (VOF) and overset mesh methods have been used to study landslide-generated tsunamis. Also, a Lagrangian tracking approach coupled with the VOF to simulate the granular movement. The effect of the water reservoir depth, the landslide height, the landslide density and the geometrical parameters on the wave height (elevation) has been investigated using the open-source OpenFOAM software. The results have been presented for dimensionless distances and the normalized geometry of the landslide in the range 5–7, 1–2, respectively. These numbers have been normalized the height of the landslide (a). According to the results of simulations, the tsunami formation process is divided into three stages, which were analyzed in detail by considering the interactions between the solid and the water reservoir. The Scott Russell wave has the highest impulse product parameter among the impulse wave mechanisms which is 58.6% of the total impulse production. In addition, the duration of the wave propagation has been computed based on the wave height.