Improving the Strain Control Performance of MoS₂ Monolayer to Develop Flexible Electronics

Abstract

In recent years, two‐dimensional (2D) materials with unique mechanical, optical, and electrical properties have attracted extensive attention. In terms of mechanical properties, 2D molybdenum disulfide (MoS2) can perform larger strains than traditional semiconductor materials. In this contribution, we used the chemical vapor deposition (CVD) technique to grow MoS2 films on a Si wafer and transfer them onto a flexible substrate. The controlled deformation of 2D MoS2 samples was realized by encapsulating them with a flexible acrylate film via successive spin‐coating and photopolymerization. Improved strain control was achieved due to the perfect integration of different components (MoS2/substrate) and the high adhesion of polymers. This approach provided a better detection of the changing structure of the MoS2 monolayer on the flexible substrate during tensile. It is noted that the crystal symmetry damage caused by strain is reflected in the redshift of the characteristic bands of MoS2. Hence, we provided an effective way for strain regulation of MoS2 for future applications in flexible devices.This article is protected by copyright. All rights reserved.

A poly(L-lactic Acid)-based flexible piezoelectric energy harvester with micro-zigzag structures

“…The acrylic elastomers were prepared with 4hydroxybutylacrylate (marked as B), tetrahydrofurfuryl acrylate (marked as T), blue initiator 4-dimethyllaminobenzoate (E13) and camphorquinone (C13) (figure 4(a)) [39] Aladdin Bio-Chem. Technology Co. (Shanghai, China) provides all the components in the solution.…”

Flexible Piezoelectric Sensors Based on Ionic Liquid‐doped Poly(L‐Lactic Acid) for Human Coughing Recognition

“…[51] Despite some properties that require improvement and additional study (for example, improved output electrical signal), the PLLA already has significant success in intelligent healthcare, motion monitoring, and wearable electronics. [52] Given that human tissues are naturally flexible and soft, flexible sensors often use elastic polymers as a protective layer [42] or substrate, [53] to attach the human skin. Except for the extensively studied polydimethyl siloxane (PDMS), many elastomers such as polyurethanes, [54,55] polyesters, [56] and styreneethylene-butylene-styrene thermoplastic elastomers [57] have been used as the flexible substrates, these elastomers generally exhibit low elastic modulus and high yield strength or high failure strain, which can recover their original shape and size after being stretched.…”

Exciton and Trion at the Perimeter and Grain Boundary of CVD-Grown Monolayer MoS2: Strain Effects Influencing Application in Nano-Optoelectronics

“…The emission spectrum of 2D MoS 2 consists of the A and B exciton peaks. The A peak is dominant and, in turn, contains two components related to a neutral exciton A 0 and a negative trion A – . ,,− The optical properties of 2D MoS 2 can be also modified by strain. − The effect of strain manifests mainly as a shift of the Raman peaks − ,− and as a change of the exciton energies, ,− occurring due to the bandgap modification caused by changes in the lattice constants. − The change in emission properties due to the effect of mechanical − ,,,,, and thermal ,, strain was investigated by many authors. On the other hand, tensile strain can be naturally present in MoS 2 flake grown by chemical vapor deposition (CVD). ,− , Since the thermal expansion of 2D MoS 2 highly exceeds that of SiO 2 /Si being used as a substrate,…”