Improving the Performance of Gas Sensor Systems with Advanced Data Evaluation, Operation, and Calibration Methods

Abstract

In order to facilitate the widespread use of gas sensors, some challenges must still be overcome. Many of those are related to the reliable quantification of ultra-low concentrations of specific compounds in a background of other gases. This thesis focuses on three important items in the measurement chain: sensor material and operating modes, evaluation of the resulting data, and test gas generation for efficient sensor calibration. New operating modes and materials for gas-sensitive field-effect transistors have been investigated. Tungsten trioxide as gate oxide can improve the selectivity to hazardous volatile organic compounds like naphthalene even in a strong and variable ethanol background. The influence of gate bias and ultraviolet light has been studied with respect to the transport of oxygen anions on the sensor surface and was used to improve classification and quantification of different gases. DAV 3 E, an internationally recognized MATLAB-based toolbox for the evaluation of cyclic sensor data, has been developed and published as opensource. It provides a user-friendly graphical interface and specially tailored algorithms from multivariate statistics. The laboratory tests conducted during this project have been extended with an interlaboratory study and a field test, both yielding valuable insights for future, more complex sensor calibration. A novel, efficient calibration approach has been proposed and evaluated with ten different gas sensor systems. i styrning och data-utvärdering som tagits fram har både en jämförande undersökning av modellernas/metodernas prestanda av två oberoende laboratorier och fält-mätningar i en av de tilltänkta tillämpningarna genomförts. Bl.a. baserat på resultaten och insikterna från dessa övningar har ett helt nytt angreppssätt avseende robust och effektiv kalibrering och kvalitets-utvärdering av sensor-system utvecklats och utvärderats för tio olika sensor-system. v Preface This dissertation is the result of my binational doctorate supervised by Prof.

Random gas mixtures for efficient gas sensor calibration

“…The random mixtures were generated using a Python script (Bastuck, 2019) which iteratively determines the ratios of all components as shown schematically in Fig. 1.…”

Metal Oxide Nanolayer-Decorated Epitaxial Graphene: A Gas Sensor Study

“…Another problem is the high time constants of the sensor, and, therefore, each measurement point was used and not the slope of the change of the signal during exposure. One way to overcome this issue would be the application of cycled methods like temperature cycled operation (TCO) to create steep changes and more transient data for evaluation [33,36,37]. A more extensive data set with different gases, concentration levels, and combined gas exposures would be needed to make a proper statement about the applicability of these exact four sensors to real-world applications, which, in turn, would be highly application-dependent.…”

Towards a versatile gas sensing platform with epitaxial graphene

“…Permeation tubes do not only enable low concentrations, but can also be used for gases with very high vapor pressure, which cannot be kept in gaseous form in pressurized gas bottles. More details about the system can be found in [61], [62].…”