Improving the Dust Removal Efficiency of a Natural Gas Filter: An Experimental and Numerical Simulation Study

Abstract

This study aims to evaluate the dust removal efficiency and working conditions of a filter separator through a pressure drop under various operating conditions. Typical horizontal filter separators in natural gas stations were taken as the research objects, and the computational fluid dynamics method was first attempted to investigate the static and dynamic characteristics of the pressure drop and the dust removal efficiency under different operating times and pressures. Then, the simulated results were compared with those obtained from online dust detection. At a constant standard flow rate, the detected pressure drop deviated from the fitted optimal quadratic curve with an increase in the operation duration of the filter separator, and the dust removal efficiency also tended to decline. The declining trend was particularly faster at lower operating pressures caused by the fast air flow, which leads to more coalesced particles flowing out and increases the dust concentration downstream. A higher initial pressure drop of the filter separator was also maintained at a low operating pressure. The dust removal efficiency rapidly decreased at a higher throughput load, and the decreasing rate became moderate at a lower input load. An optimum operating throughput of the filter was obtained when the input load varied in the range of 100 × 104–270 × 104 Nm3/d. Good agreement was achieved between the simulated and experimental dust removal efficiency, and the relative errors are within ±20%. Both methods applied in this work were verified to have high accuracy and reliability through the actual on-site amount of dust captured.