Improving Light Extraction From GaN Light-Emitting Diodes by Buried Nano-Gratings

Abstract

Recent experimental work has demonstrated that the light extraction enhancement due to scattering by a metallic nano-grating in an InGaN/GaN quantum well (QW) structure can be improved significantly by burying the grating in a dielectric, such as polyvinyl alcohol (PVA). In this paper, we employ the fluctuational electrodynamics method to investigate the origin of this improvement and to provide guidelines on how to optimize emission efficiency in these structures. Our results show that metallic grating diffracts efficiently the high-intensity PVA resonances trapped in the structure, because of the large permittivity contrast between the metal and semiconductor, providing the reported exceptional enhancement for s-polarization. We also study the effect of two important physical factors in the enhancement: 1) the thickness of the GaN barrier separating the QW from the grating and 2) the thickness of the InGaN QW. Results reveal that the enhancement efficiency can be maintained even when the QW is not in the near field of the grating, for a QW-grating separation of up to 1 µm. This is in contrast to plasmonic structures, where enhancement strongly decreases as the separation is increased. However, the enhancement factor can also vary strongly at the local level in smaller spatial intervals. Results also show that the enhancement significantly decreases with the QW thickness due to the losses in the QW.Index Terms-GaN quantum well (QW) light-emitting structures, diffraction gratings, luminescence enhancement, fluctuational electrodynamics method.

Electroluminescent Cooling in III–V Intracavity Diodes: Practical Requirements

“…The generation profiles in the PD follow the Beer-Lambert law [15]. The coupling constant is evaluated by solving the radiative transfer equation [17], with the topcontact−cap-layer system reflectivity pre-calculated using the transfer matrix method [18]. The simulations are calibrated using the three point probe I − V measurements [9], [14], biasing the LED with a voltage U and measuring the LED current I 1 , and the current generated in the PD I 2 by the LED emitted photons.…”

Electroluminescent cooling in intracavity light emitters: modeling and experiments

“…where ζ is the absorption coefficient, d is the light penetration depth, and I 0 is the intensity at reference position z = 0, matching the emission at the corresponding position in the LED. Improved photon transport models are currently being considered, such as our in-house optical model [16]− [18] to extract the reflection coefficients and Green's functions of the multi-layered structure. Ultimately, we aim to solve for the radiative transfer equation (RTE), to include more accurately photon transport along different paths and angles.…”

Current Spreading in Back-Contacted GaInP/GaAs Light-Emitting Diodes

“…1(a), due to the lateral doping and the modified structure as indicated by the results of this work. Generally, the DDCT-LEDs can enable novel devices if the substrate is removed with e.g., an epitaxial lift-off (ELO) process [19], [20]. For example, fabrication of back-contacted TF LEDs and near surface active regions should be possible.…”