Improvement of Corrosion Resistance of Hastelloy-N Alloy in LiF-NaF-KF Molten Salt by Laser Cladding Pure Metallic Coatings

Abstract

The corrosion protection of Hastelloy-N alloy in LiF-NaF-KF (commonly referred to as FLiNaK) molten salt has been developed by pure Ni and Co coatings using the laser cladding technique. An immersion experiment with samples was performed in molten FLiNaK salt at 900 °C for 100 h. It was found that the corrosion rates of the pure Ni-coated specimen and the pure Co-coated specimen are 39.9% and 35.7% of that of Hastelloy-N alloy, respectively. A careful microstructural characterization indicates that a selective dissolution of the elemental Cr occurred in the surface of bare Hastelloy-N alloy, showing a severe intergranular corrosion. For pure metal-coated specimens, in contrast, only metal oxide formed during the laser cladding process dissolved into the molten fluoride salt. The dense pure metal (Ni or Co) coatings exhibit a slightly general corrosion and protect the Hastelloy-N substrate effectively. The possible corrosion mechanism for both coated and uncoated Hastelloy-N under the current experimental condition are discussed in this work.

Effects of Low-Temperature Tempering on Microstructure and Properties of the Laser-Cladded AISI 420 Martensitic Stainless Steel Coating

“…Laser cladding, as a simple but efficient surface modification technique, has been extensively utilized in different industrial fields such as surface coating functionalization, component repair and additive manufacturing under harsh service conditions [1,2]. AISI 420 martensitic stainless steel (SS) has been considered as one of the potential alloys for creating additive manufacturing functional coatings/components owing to its high mechanical properties, moderate corrosion resistance and tailored properties by the subsequent heat treatment [2][3][4].…”